Prediction of Simulant Formability by Computer

模拟成形性的计算机预测

属类：行业术语-中文论文标题-

Formability Study of Spray-Formed Eutectic AI-Si Alloys

喷覆成形共晶铝硅合金成形性研究

属类：行业术语-中文论文标题-

Formability Study of spray-formed Eutectic Al-Si Alloys

喷射成形共晶铝硅合金的成形性研究

属类：行业术语-中文论文标题-

Specification for Steel, Sheet and Strip, Heavy Thickness Coils, Hot Rolled, Carbon, Structural, High-Strength Low-Alloy, Columbium or Vanadium, and High-Strength Low-Alloy With Improved Formability

片钢和带钢、重厚度卷材、热轧、高强度低合金结构碳钢以及改良可模塑性高强度钶或钒低合金钢规范

属类：行业标准名称-国际标准-ANSI/ASTM A 1018-2001

The Influence of the Hot Drawing Technology to the Formability of Magnesium Alloy Product

热拉深工艺对镁合金制品成形性能的影响

属类：行业术语-中文论文标题-

Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability

热轧碳钢、结构钢、高强度低合金钢和可加工性提高的高强度低合金钢薄板和带材的标准规范

属类：行业标准名称-国际标准-ASTM A 1011/A 1011M-2001

Test Method for Bend Test for Formability of Copper Alloy Spring Material

铜合金弹簧材料可成型性的弯曲试验方法

属类：行业标准名称-国际标准-ASTM B 820-1998

Formability of multi-layered Biaxial Weft Knitted Fabrics on Double Hemisphere

纬编双轴向多层衬纱织物的双半球成型性

属类：行业术语-中文论文标题-

Formability of multi-layered Biaxial Weft Knitted Fabrics on a Cylinder

纬编双轴向多层衬纱织物的圆柱成型研究

属类：行业术语-中文论文标题-

Effect of RE, Ti and Nb on Recrystallization and Formability of ULC Cold-Rolled Enamel Sheets

稀土、钛和铌对冷轧超低碳搪瓷钢板成形性能的影响

属类：行业术语-中文论文标题-

Investigation on Formability of Sintering PP Part by Selective Laser Sintering

选区激光烧结PP试件成型性研究

属类：行业术语-中文论文标题-

The Stress Transfer of Blank Holder and Its Effect on Sheet Formability

压边圈应力传递规律及其对冲压成形的影响

属类：行业术语-中文论文标题-

Hot-rolled steel sheet of higher yield strength with improved formability

压缩成型的高屈服强度热轧钢

属类：行业标准名称-国际标准-ISO 5951-2001

State of the Art in Methods for Determining the Formability of Tube Hydroforming

液压成形管材性能评价方法研究现状

属类：行业术语-中文论文标题-

Test Method for Formability of Attached Organic Coatings with Impact-Wedge Bend Apparatus

用冲击边缘弯曲仪测定附加有机涂层可成形性的试验方法

属类：行业标准名称-国际标准-ASTM D 3281-1984

Cold-reduced steel sheet of higher strength with improved formability

有改进可成型性较高强度的冷轧薄钢板

属类：行业标准名称-国际标准-ISO 13887-1995

Cold-reduced steel sheet of higher yield strength with improved formability

增强可成型性的高屈服强度冷轧薄钢板

属类：行业标准名称-ISO标准-

that the size and shape of TWBs have significant influence on the fracture site and the formability .

板料毛坯形状和尺寸对失效破裂的位置和成形性能影响显著。

属类：中国大陆-www.ceps.com.tw-

The formability would be influenced with the reduction of the cooling rate.

但随着冷却速度下降，易产生流淌，影响成形性。

属类：中国大陆-www.ceps.com.tw-

The formability can be increased by altering the forming strain path in the dangerous position and adjusting the lurking fracture site.

改变危险点的应变路径，调节失效破裂的位置，可有效地提高拼焊板方盒件的冲压成形性。

属类：中国大陆-www.ceps.com.tw-

Disclosed is a wrought magnesium alloy having excellent strength and extrusion or rolling formability , and a method of producing the same.

公开了一种具有优秀强度和挤压或轧制成形性的变形镁合金，以及该变形镁合金的制造方法。

属类：英汉句库-ip.com-

Select blank reasonably can mainly improve sheet formability , make full use of original material and reduce the amount of subsequent work.

合理地选择冲压件的毛料外形，可以提高板料的可成性，同时也可以提高材料利用率。

属类：中国大陆-www.ceps.com.tw-

The formability of aluminum alloy at room temperature is very low, which can be improved significantly by high velocity forming process.

铝合金板材室温下的成形性较差，但在高速变形条件下成形极限大幅提高。

属类：中国大陆-www.ceps.com.tw-

It has been experimentally indicated that moderate wrinkling will make a contribution to enhancing the formability of tube hydroforming.

实验结果表明，适度的起皱有助于提高薄壁管内高压成形的成形极限。

属类：中国大陆-www.ceps.com.tw-

The formability range of the alloy is extended because the added elements can thin the alloy tissue substantially;

所添加元素可大幅细化合金组织，使合金的可成形温度范围扩大；

属类：英汉句库-ip.com-

The numerical simulation results indicate that the variable blank-holder force can improve the formability of box deep drawing process.

研究表明，采用变压边力控制技术可以显著改善矩形盒的成形性能。

属类：中国大陆-www.ceps.com.tw-

Numerical Simulation of Forming Process and Formability in Cone-shaped and Thin-walled Part

圆锥形薄壁件成形过程及性能的数值模拟

属类：中国大陆-www.ilib.cn-

And adjusting the rolling process and selecting rolling ways to enhance magnesium alloy rolled formability are mainly demonstrated.

重点阐述了通过调整轧制工艺和选择轧制方式提高镁合金的轧制成形性。

属类：中国大陆-www.ceps.com.tw-