stem faucet:阀杆水龙头 详图:
1 |
stem faucet |
阀杆水龙头 |
Device stopping or starting the flow of hot or cold water, as well as regulating its flow rate.
停止或启动热水或冷水流动,并调节其流速的装置。 |
||
2 |
valve seat |
阀座,管座,阀座 |
Part against which the stem washer presses to prevent leakage.
阀杆垫圈压紧以防止泄漏的部件。 |
||
3 |
thread [θred] |
线 |
Helical grooves at the end of the spout to which an accessory, such as an aerator, can be attached.
喷口末端的螺旋槽,附件(如曝气器)可附着在该槽上。 |
||
4 |
packing [’pækɪŋ] |
包装;打包 |
Gasket preventing the spindle from leaking.
防止主轴泄漏的垫圈。 |
||
5 |
stem washer |
阀杆垫圈 |
Stopper attached to the bottom of the spindle. When inserted into the valve seat, it blocks the inflow of water; when raised, it allows the water to flow.
固定在主轴底部的塞子。当插入阀座时,它阻止水的流入;当升高时,它允许水流动。 |
||
6 |
stem holder |
冲头座 |
Bracket for the stem washer.
语音清洗器支架。 |
||
7 |
packing nut |
填密螺母 |
Metal part allowing the packing to be tightened against the washer... nuts
金属部件,允许将填料拧紧到垫圈上。 |