Cell: (1)Indentation in the surface of a photogravure cylinder that holds the ink.(2)A device which produces a flow of electric charge, i.e. an electric current. (3)The smallest part of a plant or animal.

(1)细窝,(2)电池,(3)细胞:(1)照相凹版圆筒上用来装载油墨的低陷部分.(2)产生电荷流动,即电流的器具.(3)动物或植物的最小部分.

属类：行业术语-印刷-

dynamic ball indentation hardness

(用)落球(确定的)硬度

属类：综合句库-英汉综合-

Backrind is a distortion that occurs at the mold parting line and leaves a ragged indentation in the part

Backrind是指分模线上扭曲，导致制件上出现粗糙的缺口

属类：机械模具-机械模具-模具术语

An indentation or small hollow.

凹处凹陷处或小洞小坑

属类：综合句库--

A slight depression or indentation in a surface.

凹痕表面上轻微的下陷或凹陷

属类：综合句库--

Resilient floor coverings-Determination of residual indentation after static loading

弹性地板覆盖物.静荷载后残留压痕的测定

属类：行业标准名称-国际标准-BS EN 433-1994

RESILIENT FLOOR COVERINGS. DETERMINATION OF RESIDUAL INDENTATION AFTER STATIC LOADING. (EUROPEAN STANDARD EN 433).

弹性地面覆盖物.静负载后剩余陷穴的测定

属类：行业标准名称-国际标准-NF P62-110-1994

Testing of elastomers; determination of indentation hardness of soft rubber (IRHD); hardness testing on standard specimens

弹性体的检验.软橡胶压痕硬度的测定.标准试样的硬度检验

属类：行业标准名称-国际标准-DIN 53519-1-1972

Testing of Elastomers; Determination of Indentation Hardness of Soft Rubber (IRHD), Hardness Testing on Specimens of Small Dimensions, Micro-testing

弹性体的检验.软橡皮球压硬度的测定.国际橡胶硬度(IRHD).小尺寸试样的硬度检验.微硬度检验

属类：行业标准名称-国际标准-DIN 53519-2-1972

Resilient floor coverings-Determination of residual indentation after static loading;

弹性体铺面.恒定负载后残余压力测定

属类：行业标准名称-国际标准-DIN EN 433-1994

Testing of cables, wires and flexible cords; indentation strength VDE Specification

电缆、导线和软线的试验.压痕强度.规范

属类：行业标准名称-国际标准-DIN VDE 0472-619-1983

Full – out: A style of typesetting;the first line of a paragraph is set flush with no indentation , occupying the whole measure.

顶格:排字款式:段落的第一行占整栏宽度，并不缩排。

属类：行业术语-印刷-

Advanced technical ceramics-Methods of test for ceramic coatings-Determination of hardness and Young’s modulus by instrumented indentation testing

高级工业陶瓷.陶瓷涂层的试验方法.用仪器化刻痕试验测定硬度及杨式模量

属类：行业标准名称-国际标准-BS DD CEN/TS 1071-7-2003

Polymeric materials,cellular flexible-Determination of hardness (indentation technique)

高聚物多孔弹性材料凹入度法硬度试验

属类：行业标准名称-国家标准名-GB/T12825-1991

Blade scratch: Paper defect where there is a hair-like indentation in a coated surface running in grain direction. Caused by a particle lodged behind the blade during coating.

刮刀痕:顺着纸纹方向，纸面的涂层有着像头发丝的凹痕故障。起因是在涂布时有一颗料积聚在刮刀后面所致。

属类：行业术语-印刷-

An outline or indentation left by a foot on a surface.

脚印脚在表面上留下的轮廓或凹痕

属类：综合句库--

Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 1: Test method

金属材料.硬度和材料参数的仪器压痕试验.第1部分:试验方法

属类：行业标准名称-ISO标准-

Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 2: Verification and calibration of testing machines

金属材料.硬度和材料参数的仪器压痕试验.第2部分:试验机的检定和校准

属类：行业标准名称-ISO标准-

Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 3: Calibration of reference blocks

金属材料.硬度和材料参数的仪器压痕试验.第3部分:硬度标准块的校准

属类：行业标准名称-ISO标准-

Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 1: Test method

金属材料测定硬度及材料参数用仪器压痕试验第1部分:试验方法

属类：行业标准名称-国际标准-EN ISO 14577-1-2002

Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 2: Verification and calibration of testing machines

金属材料测定硬度及材料参数用仪器压痕试验第2部分:试验机的检验与校正

属类：行业标准名称-国际标准-EN ISO 14577-2-2002

Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 3: Calibration of reference blocks

金属材料测定硬度及材料参数用仪器压痕试验第3部分:基准块的刻度

属类：行业标准名称-国际标准-EN ISO 14577-3-2002

A small natural indentation in the flesh on a part of the human body,especially in the cheek or on the chin.

酒窝在身体某一部分(特别在脸颊或下颚处)的天然凹陷

属类：综合句库--

An indentation or a dent.

锯齿状缺口或凹痕

属类：综合句库--

Coil coat metals-Test methods-Part 6 : adhesion after indentation (cupping test).

卷材覆层金属.试验方法.第6部分:压痕后的粘着力(杯突试验)

属类：行业标准名称-国际标准-NF T37-001-6-2002

Coil coated metals-Test methods-Part 6: Adhesion after indentation (cupping test);

卷材覆层金属.试验方法.第6部分:压痕后的粘着力.杯突试验

属类：行业标准名称-国际标准-DIN EN 13523-6-2002

Coil coated metals-Test methods-Adhesion after indentation (cupping test)

卷材覆层金属.试验方法.做成刻纹后粘结(杯形挤压试验)

属类：行业标准名称-国际标准-BS EN 13523-6-2002

A split or indentation between two parts,as of the chin.

开裂，凹陷两部分间(如下巴)的裂隙或凹口

属类：综合句库--

A small indentation or ledge on which the toe of a shoe can find support in climbing.

立足点在爬山中鞋尖可以找到支撑的小凹陷或岩石空出部

属类：综合句库--

Testing of asphalt; indentation testing using a flat-ended indentor pin

沥青的试验.使用平端压头针的压印试验

属类：行业标准名称-国际标准-DIN 1996-13-1984