hydraulically查询结果如下:
名词 变体/同根词
hydraulically driven
水压传动的液压传动的
属类:行业术语
-海运 - -
hydraulically automatic
n.液压自动式,油压自动式
属类:机械模具
-机械 - -
hydraulically damped seat
液力减震座位
属类:简明英汉词典
-简明词典 - -
hydraulically lifted reel
n.液力起落式拔禾轮
属类:机械模具
-机械 - -
hydraulically raised plow
n.液压起落犁
属类:机械模具
-机械 - -
hydraulically driven baler
n.液压传动的捡拾压捆机
属类:工程技术
-航空工程 - -
hydraulically operated gate
液压闸门
属类:工程技术
-建筑工程 - -
hydraulically actuated form
液压促动模板
属类:简明英汉词典
-简明词典 - -
hydraulically powered winch
液力传动绞车
属类:简明英汉词典
-简明词典 - -
hydraulically actuated gyro
n.液压陀螺仪
属类:工程技术
-船舶工程 - -
hydraulically actuated brake
n.液压制动器,液力制动器
属类:工程技术
-航空工程 - -
hydraulically operated clutch
液力操纵离合器
属类:简明英汉词典
-简明词典 - -
hydraulically-driven fracture
液压驱动断裂
属类:IT行业
-电脑术语 - -
hydraulically operated fixture
液压夹具
属类:简明英汉词典
-简明词典 - -
hydraulically assisted steering
油压辅助转向操纵
属类:机械模具
-机械 - -
hydraulically operated equipment
n.液压设备,液动设备
属类:行业术语
-纺织 - -
hydraulically balanced servovalve
液压平衡式伺服阀
属类:行业术语
-电信 - -
hydraulically cushioned protection
液压减震的防护
属类:简明英汉词典
-简明词典 - -
hydraulically-operated hatch cover
液压操纵舱口盖,液动舱口盖
属类:行业术语
-海运 - -
hydraulically-operated hatch covers
液压操纵(启闭的)舱口盖
属类:行业术语
-海运 - -
hydraulically operated hoist system
液压操纵起吊装置
属类:行业术语
-海运 - -
hydraulically assisted steering gear
液压助力转向装置
属类:机械模具
-机械 - -
hydraulically-operated bulkhead valve
n.液压操纵舱壁隔离阀
属类:工程技术
-船舶工程 - -
hydraulically assisted steering gears
液压式协助旋转齿轮
属类:机械模具
-机械 - -
hydraulically-controlled one-way valve
液压(控制)单向阀
属类:行业术语
-海运 - -
hydraulically-driven transverse thruster
n.液压传动侧推器
属类:工程技术
-船舶工程 - -
hydraulically actuated exhaust valve mechanism
液压式排气阀传动机构
属类:行业术语
-航海科技 - -
hydraulically-actuated exhaust valve mechanism
液压式排气阀机构
属类:行业术语
-海运 - -
hydraulically tensioned heave compensating riser
n.液压拉紧垂荡补偿立管
属类:工程技术
-船舶工程 - -
in 1935, BMW launches the R 12 and R 17, fitted with the world′s first hydraulically damped telescopic forks.
1935年,BMW推出了配有世界上最早的hydraulically damped telescopic forks系统的R 12和R 17两款摩托车。
属类:单位简介-汽车公司网站-BMW历史
Specification for tube of 99% aluminium (cold drawn: seamless: tested hydraulically )(not exceeding 12 mm wall thickness)
99%铝管规范(冷拔:无缝:经过液压试验)(壁厚不超过12mm)
属类:行业标准名称-国际标准-BS 4L 54-1986
Leakage Analysis and Treatment of LW6 Hydraulically Driven Device
LW6型断路器液压机构渗漏油分析判断及处理
属类:行业术语-中文论文标题-
Construction Technology of Vacuum Preloading for Compaction Treatment of Large-Area Hydraulically-Filled Soft Ground
大面积吹填软土地基真空预压施工工艺
属类:行业术语-中文论文标题-
Irrigation equipment; hydraulically operated irrigation valves
灌溉设备 液压操纵灌溉阀
属类:行业标准名称-ISO标准-
Study on Intelligent PIP Control of Hydraulically Driven Lift System with Multistage Hydraulic Cylinder
含多级油缸的液压举升系统智能PID控制研究
属类:行业术语-中文论文标题-
The welder is 1650MM 270kva,hydraulically and pneumatically operated C-Flat Narrow Lap Seam Welder with joint planisher.
焊机是1650mm270KVA,液压和气动操作的C型-板材窄搭接碾压缝焊机。
属类:工程技术-冶金-
Dynamic Characteristic Analysis of Hydraulically Damped Rubber Mount: LP Model Based on FSI FE Simulation
基于液-固耦合有限元仿真的液阻悬置集总参数模型动特性分析
属类:行业术语-中文论文标题-
Recoiler is consists of auxiliary recoiler (pushing out hydraulically , clamping auxiliary recoiler), coil discharging car and coil storage position.
卷取机:带助卷器(液压推出抱紧助卷)卸卷小车和存卷鞍座。
属类:工程技术-冶金-
Optional electronic-hydraulically controlled forward-trailing or trailing axles for an optimum turning circle.
可选装带有电子-液压控制的前、后从动桥,实现最佳的转弯半径。
属类:单位简介-汽车公司网站-产品介绍
Dynamic Compaction of Hydraulically Filled Silty Soil in Lianyungang Port
连云港吹填淤泥地基的强夯法加固研究
属类:行业术语-中文论文标题-
Specification for tube of aluminium-2% magnesium alloy (temper designation-O)(seamless: tested hydraulically )(not exceeding 12 mm wall thickness
铝-2%镁合金管规范(强度符号-O)(无缝管:水力试验)(不超过12mm壁厚)
属类:行业标准名称-国际标准-BS 4L 56-1986
Specification for tube of aluminium-magnesium-silicon-copper-chromium alloy (solution treated and artificially aged: not tested hydraulically )(not exceeding 10 mm thickness)(Mg 1.0, Si 0.6, Cu 0.28,
铝-镁(1.0)-硅(0.6)-铜(0.28)-铬(0.2)合金管规范(溶液处理和人工时效:未经液压试验)(厚度小于10mm)
属类:行业标准名称-国际标准-BS L 117-1975
Specification for tube of aluminium-magnesium-silicon-copper-chromium alloy (solution treated and artificially aged: tested hydraulically )(not exceeding 10 mm thickness)(Mg 1.0, Si 0.6, Cu 0.28, Cr
铝-镁(1.0)-硅(0.6)-铜(0.28)-铬(0.2)合金管规范(溶液处理和人工时效:液压试验)(壁厚度小于10mm)
属类:行业标准名称-国际标准-BS L 118-1975
Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
民用工程和道路建筑用非结合的和液压结合材料用集料
属类:行业标准名称-国际标准-BS EN 13242-2002
Mechanism of Preventing Coal and Gas Compression Disseminated Values Outburst with Stress Pre-Released Hydraulically
水力卸压防止承压散体煤和瓦斯突出机理
属类:行业术语-中文论文标题-
Unbound and hydraulically bound mixtures-Test method for the determination of the alpha coefficient of vitrified blast furnace slag
松散的和液力粘合的混合料.玻化高炉矿渣的α系数测定的试验方法
属类:行业标准名称-国际标准-BS EN 13286-44-2003
Unbound and hydraulically bound mixtures-Test method for the determination of the moisture condition value
松散的和液力粘合的混合料.测定湿度值试验方法
属类:行业标准名称-国际标准-BS EN 13286-46-2003
Unbound and hydraulically bound mixtures-Test method for the determination of the modulus of elasticity of hydraulically bound mixtures
松散的和液力粘合的混合料.测定液力粘合混合料弹性模量的试验方法
属类:行业标准名称-国际标准-BS EN 13286-43-2003
Unbound and hydraulically bound mixtures-Test method for the determination of the indirect tensile strength of hydraulically bound mixtures
松散的和液力粘合的混合料.测定液力粘合混合料非直接拉力强度的试验方法
属类:行业标准名称-国际标准-BS EN 13286-42-2003
Unbound and hydraulically bound mixtures-Test method for determination of the compressive strength of hydraulically bound mixtures
松散的和液力粘合的混合料.测定液力粘合混合料抗压强度的试验方法
属类:行业标准名称-国际标准-BS EN 13286-41-2003
Unbound and hydraulically bound mixtures-Test method for the determination of the workability period of hydraulically bound mixtures
松散的和液力粘合的混合料.测定液力粘合混合料可加工周期的试验方法
属类:行业标准名称-国际标准-BS EN 13286-45-2003
Unbound and hydraulically bound mixtures-Test method for determination of the direct tensile strength of hydraulically bound mixtures
松散的和液力粘合的混合料.测定液力粘合混合料直接拉力强度的试验方法
属类:行业标准名称-国际标准-BS EN 13286-40-2003
Unbound and hydraulically bound mixtures-Part 1: Test methods for laboratory reference density and water content; introduction and general requirements and sampling;
松散的和液力粘合的混合料.第1部分:实验室参考密度和水含量的测试方法.说明、一般要求和取样
属类:行业标准名称-国际标准-DIN EN 13286-1-2003
Unbound and hydraulically bound mixtures-Part 3: Test methods for laboratory reference density and water content; Vibrocompression with controlled parameters;
松散的和液力粘合的混合料.第3部分:实验室参考密度和水含量的测试方法.有受控参数的振实法
属类:行业标准名称-国际标准-DIN EN 13286-3-2003
Unbound and hydraulically bound mixtures-Part 40 : test method for the determination of the direct tensile strength of hydraulically bound mixtures.
松散的和液力粘合的混合料.第40部分:液力粘合混合料的直接拉伸强度测定的试验方法
属类:行业标准名称-国际标准-NF P98-846-40-2003
Unbound and hydraulically bound mixtures-Part 41 : test method for the determination of the compressive strength of hydraulically bound mixtures.
松散的和液力粘合的混合料.第41部分:液力粘合混合料的压缩强度测定的试验方法
属类:行业标准名称-国际标准-NF P98-846-41-2003
Unbound and hydraulically bound mixtures-Part 42 : test method for the determination of the indirect tensile strength of hydraulically bound mixtures.
松散的和液力粘合的混合料.第42部分:液力粘合混合料的非直接拉伸强度测定的试验方法
属类:行业标准名称-国际标准-NF P98-846-42-2003
Unbound and hydraulically bound mixtures-Part 43 : test method for the determination of the modulus of elasticity of hydraulically bound mixtures.
松散的和液力粘合的混合料.第43部分:液力粘合混合料弹性模数测定的试验方法
属类:行业标准名称-国际标准-NF P98-846-43-2003
Unbound and hydraulically bound mixtures-Part 44: Test method for the determination of the alpha coefficient of vitrified blast furnace slag;
松散的和液力粘合的混合料.第44部分:玻化高炉矿渣的α系数测定的试验方法
属类:行业标准名称-国际标准-DIN EN 13286-44-2003
adverb
1.
‘A hydraulic hammer is basically a _hydraulically_ powered reciprocating piston inside of a body.’
‘The wheels are fitted with dual circuit _hydraulically_ operated disc brakes and anti-skid braking.’
独上高台望四海 手揽云月傍天飞, 落叶重重已十月 归鸟凄凄啼心扉。