Plastics piping systems-Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride)(PVC-U)pipes-Test method for leaktightness under internal pressure and with angular deflection

塑料管道系统用于硬(聚氯乙烯)(PVC-U)管道的弹性密封环式承口连接件内压下角度偏转密封试验方法

属类：行业标准名称-国际标准-EN ISO 13845-2000

Test method of heat deflection temperature underbending load for plastics

塑料弯曲负载热变形温度(简称热变形温度)试验方法

属类：行业标准名称-国家标准名-GB/T1634-1979

Plastics-Determination of temperature of deflection under load-Part 1: General test method

塑料载荷下挠曲温度的测定第1部分:一般试验方法

属类：行业标准名称-国际标准-EN ISO 75-1-1996

Plastics-Determination of temperature of deflection under load-Part 2: Plastics and ebonite

塑料载荷下挠曲温度的测定第2部分:塑料与硬橡胶

属类：行业标准名称-国际标准-EN ISO 75-2-1996

Plastics-Determination of temperature of deflection under load-Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics

塑料载荷下挠曲温度的测定第3部分:高强度热固性叠层板和长纤维增强塑料

属类：行业标准名称-国际标准-EN ISO 75-3-1996

Earth-moving machinery-Laboratory evaluations of protective structures-Specifications for deflection -limiting volume

土方机械 保护结构的实验室鉴定 挠曲极限量的规范

属类：行业标准名称-ISO标准-

Earth-moving machinery-Laboratory evaluations of protective structures-Specifications for deflection -limiting volume

土方机械.保护结构的实验室评定.极限偏差容量规范

属类：行业标准名称-国际标准-DIN EN ISO 3164-1999

Earth-moving machinery-Laboratory evaluations of protective structures-Specifications for deflection -limiting volume

土方机械.防护结构的实验室评定.极限偏差容量规范

属类：行业标准名称-国际标准-BS EN ISO 3164-2000

Earth-moving machinery-Laboratory evaluations of protective structures-Specifications for deflection -limiting volume

土方机械保护结构的实验室鉴定挠曲极限的规范

属类：行业标准名称-国际标准-EN ISO 3164-1999

Methods of test for ancillary components for masonry-Determination of load capacity and load-deflection characteristics of straps

圬工辅助部件的试验方法.固定枷板的负载容量和负载偏离特性的测定

属类：行业标准名称-国际标准-BS EN 846-4-2002

Methods of test for ancillary components for masonry-Part 10 : determination of load capacity and load deflection characteristics of brackets.

圬工辅助成份的试验方法.第10部分:支架负载偏转特性和负载容量的测定

属类：行业标准名称-国际标准-NF P12-610-2000

Methods of test for ancillary components for masonry-Part 8 : determination of load capacity and load-deflection characteristics of joist hangers.

圬工辅助成份的试验方法.第8部分:墙筋吊架处负载偏转特性和负载容量的测定

属类：行业标准名称-国际标准-NF P12-608-2000

Methods of test for ancillary components for masonry-Determination of load capacity and load-deflection characteristics of joist hangers

圬工辅助件的试验方法.小梁吊架的拉伸和压缩负载容量和负载偏转特性的测定(灰浆连接处的耦合试验)

属类：行业标准名称-国际标准-BS EN 846-8-2000

Methods of test for ancillary components for masonry-Determination of load capacity and load deflection characteristics of brackets

圬工辅助件的试验方法.砖的负载容量和负载偏离特性的测定

属类：行业标准名称-国际标准-BS EN 846-10-2000

The angle of rotation, which provides a measure of the current flowing in the coil, is measured by the movement of the needle or by the deflection of a beam of light reflected from the mirror.

旋转角度可用来度量线圈内通过的电流，角度用指针的转动或镜面反射光线的偏转来测定。

属类：工程技术-机械与工具-

You are asked to construct an ammeter to measure a current of 2 A at full scale deflection

要你装配一只满标度时测量2安的电流计。

属类：综合句库--

Medical endoscopes-Interface and deflection of distal end

医用内窥镜.远终端的偏转和接口

属类：行业标准名称-国际标准-DIN 58105-2000

cathode-ray tube post-deflection acceleration

阴极射线管偏转后加速

属类：综合句库-英汉综合-

Problem-solving of Large Deflection Square Plates under Four Sides Clamped by Perturbation Method

用摄动法求解四边夹紧大挠度方板问题

属类：行业术语-中文论文标题-

There’s a lot of fire coming from the right side of that deflection tower.-I’m on it

右边的炮塔，攻击猛烈!我要上了-我要进去了

属类：综合句库--

circular-deflection driver tube

圆形偏转线路驱动管

属类：综合句库-英汉综合-

Telecommunications-Integrated Services Digital Network (ISDN)-Call deflection supplementary service

远程通信.综合服务数字网络.呼叫偏转补充服务

属类：行业标准名称-国际标准-ANSI T1.642-1995

Cross-country skis; Determination of breaking load and deflection at break with quasistatic load

越野雪橇 准静态载荷在断裂载荷和弯曲时的测定

属类：行业标准名称-ISO标准-

Cross country skis; determination of breaking load and deflection at break with quasistatic load; identical with ISO 7797, edition 1985

越野雪橇.准静态载荷断裂断裂力和弯曲值的测定

属类：行业标准名称-国际标准-DIN ISO 7797-1986

Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position

在挠曲负荷下塑料横向位置挠曲温度的标准测试方法

属类：行业标准名称-国际标准-ASTM D 648-2001

This azimuth motion is known as the ballistic deflection error

这种绕方位轴的运动称为冲击偏差。

属类：综合句库--

"This support should be rigid and of sufficient strength to prevent ""wind up"", deflection or transfer of abnormal loads to the valve. "

这种支撑应该是坚固的,并具有足够的强度能够防止"被风刮倒",垂直偏差,或对阀门加长不正常的重物所导致的压力。

属类：产品说明书-洁具说明-

Positive aileron deflection produces an anti-clockwise moment about the X axis

正的副翼偏转角产生绕X轴的负方向力矩。

属类：综合句库--

rectangular-coordinate deflection yoke

直角座标偏转线圈

属类：综合句库-英汉综合-

anti-deflection press roll

中固(抗挠)压榨辊

属类：综合句库-英汉综合-