Hot Rolled, Ribbed and Grooved Spring Steel; Dimensions, Weights, Permissible Deviations , Static Values

热轧加筋弹簧钢.尺寸.重量.允许偏差.静态值

属类：行业标准名称-国际标准-DIN 1570-1979

Any material deviations from standard-packing, gasket, bolting, etc.

任何与标准配置不同的材料:密封材料,沉淀材料,螺栓材料,等等。

属类：产品说明书-产品-热水器

Any deviations from the requirements will be brought out and settled with the customer beforehand.

任何与合同要求不一致的事项需事先提交顾客磋商解决。

属类：应用文体-质量手册-实例

if the instructions so provide, deviations from the specified form or manner not affecting the substance thereof shall not invalidate that form or manner.

如指示中订定,不符指明格式或方式之处倘无实质影响便不会使该格式或方式无效,则须据此办理。

属类：法学专业-香港法规-商船注册条例

In Shantung there is lethargy in some places and rashness in others. Generally speaking, both these deviations are to be found in all the provinces and cities in the country and attention should be paid to setting them right

山东有些地方存在着劲头不足的偏向,有些地方存在着草率从事的偏向,这是全国各省市大体上都存在的两种偏向,都应注意纠正。

属类：综合句库--

Prisms providing deviations ranging from about 15to roughly 45are available commercially

市场上能买到的棱镜的偏转角大约从15°到45°。

属类：综合句库--

Single-and double-start acme thread with clearance for rail vehicles-Part 2: Thread limits and limit deviations

铁路车辆用带间隙的单头和双头爱克米螺纹.第2部分:螺纹极限和极限偏差

属类：行业标准名称-国际标准-DIN 263-2-2000

Cold forming sectional steel--Open sectional steel for general structure--Dimension,form,weight and permissible deviations

通用冷弯开口型钢尺寸、外形、重量及允许偏差

属类：行业标准名称-国家标准名-GB/T6723-1986

Sawn timber used in pallets-Permitted deviations and guidelines for dimensions

托盘用锯材.允许偏差和尺寸指南

属类：行业标准名称-国际标准-BS EN 12249-1999

Let me add that our socialist state apparatus is so powerful that it can intervene to correct any deviations .

我还要说,我们社会主义的国家机器是强有力的。一旦发现偏离社会主义方向的情况,国家机器就会出面干预,把它纠正过来。

属类：时事政治-邓小平选集-改革是必由之路

We have struggled against opportunist deviations in our Party, both Right and "Left"

我们曾和党内的机会主义倾向作斗争,右的和“左”的。

属类：综合句库--

The WTO-SPS Agreement and the NRT of the IPPC now ensures that there are structured channels for notification of changes to phytosanitary measures, deviations in the relevant regulations, and a forum for information sharing.

现在WTO;SPS协定和IPPC新修订文本确保有专门渠道来通知植物检疫措施的变更、相关法规的修改,并且有一个分享信息的论坛。

属类：行业术语-检验检疫-

Now you are making an over-all summing-up and, after correcting the "Left" deviations , you will achieve greater successes

现在作一次全面的总结,纠正了“左”的偏向,就会做出更大的成绩来。

属类：综合句库--

The average recoveries and the relative standard deviations were 72.0%-80.4% and 8.3%-13.9%, respectively.

样品的加标平均回收率为72.0%-80.4%,相对标准偏差为8.3%-13.9%

属类：化学及生命科学-化学-论文文摘

to warn people of the influence of both the Right and the "Left" deviations , particularly of the deep-rooted "Left" influence.

要人们警惕右和"左"的影响,特别是"左"的根深蒂固的影响。

属类：时事政治-时政术语-改革开放

warn people of the influence of both the Right and the "Left" deviations , particularly of the deep-rooted "Left" influence.

要人们警惕右和“左”的影响,特别是“左”的根深蒂固的影响

属类：时事政治-时政术语-政经新词

Due to certain legal regulations in different countries, deviations in the technical data described here can occur.

因为在不同国家有不同的规定,所以在技术数据的描述上会有一些偏差。

属类：单位简介-汽车公司网站-产品介绍

Macroscopic deviations from isotropy occur due to bedding, schistosity and also sometimes fracturing

与各向同性相差很大的情况往往产生于层理,片理,某些时候则由于断裂所造成。

属类：综合句库--

Round and sawn timber-Permitted deviations and preferred sizes-Part 1 : softwood sawn timber.

圆木和锯材.允许偏差和优选尺寸.第1部分:软木锯材

属类：行业标准名称-国际标准-NF B53-624-1-1997(欧洲标准EN 1313-1)

Round and sawn timber. Permitted deviations and preferred sizes. Part 2 : hardwood sawn timber.

圆木和锯材.允许偏差和优选尺寸.第2部分:硬木锯材

属类：行业标准名称-国际标准-NF B53-624-2-1999

Round and sawn timber-Permitted deviations and preferred sizes-Softwood sawn timber

圆形木材和锯材.允许偏差和优选尺寸.软木锯材

属类：行业标准名称-国际标准-BS EN 1313-1-1997

Round and sawn timber-Permitted deviations and preferred sizes-Hardwood sawn timber

圆形木材和锯材.允许偏差和优选尺寸.硬木锯材

属类：行业标准名称-国际标准-BS EN 1313-2-1999

Spring Steel, Round, Hot Rolled; Dimensions, Permissible Deviations on Dimension and Form

圆形热轧弹簧钢.尺寸.允许尺寸和形状偏差

属类：行业标准名称-国际标准-DIN 2077-1979

Cylindrical gears-ISO system of accuracy-Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information

圆柱齿轮 ISO准确度制 第2部分:径向偏差和不圆度误差的定义及允许偏差值

属类：行业标准名称-ISO标准-

Cylindrical gears-Code of inspection practice-Part 2: Inspection related to radial composite deviations , runout, tooth thickness and backlash

圆柱齿轮 实用检验规则 第2部分:径向偏差、椭圆度、齿厚和齿间隙的检验

属类：行业标准名称-ISO标准-

Cylindrical gears-Code of inspection practice-Part 2: Inspection related to radial composite deviations , runout, tooth thickness and backlash-Technical Corrigendum 1

圆柱齿轮 实用检验规则 第2部分:径向偏差、椭圆度、齿厚和齿间隙的检验 技术勘误1

属类：行业标准名称-ISO标准-

CYLINDRICAL GEARS. ISO SYSTEM OF ACCURACY. PART 2 : DEFINITIONS AND ALLOWABLE VALUES OF DEVIATIONS RELEVANT TO RADIAL COMPOSITE DEVIATIONS AND RUNOUT INFORMATION.

圆柱齿轮.ISO 体系的准确度.第2部分:有关放射要素偏差度和输出信息的相应偏差的容许值和定义

属类：行业标准名称-国际标准-NF E23-007-2-1997

Cylindrical gears-Code of inspection practice-Inspection related to radial composite deviations , runout, tooth thickness and backlash

圆柱齿轮.检验实施标准.与径向组合偏差,径向跳动,齿厚和齿隙相关的检验

属类：行业标准名称-国际标准-BS ISO TR 10064-2-1997

Cylindrical gears-Code of inspection practice-Part 2: Inspection related to radial composite deviations , runout, tooth thickness and backlash; Technical Corrigendum 1

圆柱齿轮.检验实施规程.第2部分:与径向复合偏差磨损及齿厚齿隙有关的检验.技术勘误1

属类：行业标准名称-ISO标准-

Cylindrical gears-Code of inspection practice-Part 2: Inspection related to radial composite deviations , runout, tooth thickness and backlash

圆柱齿轮.检验实用规程.第2部分:检验放射线偏差度,跳动,齿厚和侧隙

属类：行业标准名称-国际标准-ISO/TR 10064-2-1996