包含
ejector的中国译典句库查询结果如下:
属类:行业术语-中文论文标题-
属类:行业术语-中文论文标题-
属类:行业标准名称-国际标准-BS ISO 8693-1999
属类:行业标准名称-国际标准-BS ISO 8405-1999
属类:行业标准名称-国际标准-BS ISO 6751-1998
属类:行业标准名称-国际标准-BS ISO 8694-1998
属类:行业标准名称-国际标准-DIN ISO 6751-2000
属类:行业标准名称-国际标准-DIN ISO 8405-2000
属类:行业术语-中文论文标题-
属类:中国大陆-service.ilib.cn-
属类:中国大陆-www.ilib.cn-
属类:中国大陆-www.ilib.cn-
属类:中国大陆-www.ilib.cn-
属类:中国大陆-www.ilib.cn-
属类:中国大陆-www.ilib.cn-
属类:中国大陆-www.ilib.cn-
属类:中国大陆-www.ilib.cn-
属类:中国大陆-ilib.cn-
属类:中国大陆-www.ilib.cn-
属类:中国大陆-wenku.baidu.com-
属类:中国大陆-ilib.cn-
属类:中国大陆-service.ilib.cn-
属类:中国大陆-scholar.ilib.cn-
属类:中国大陆-service.ilib.cn-
属类:中国大陆-www.ilib.cn-
属类:中国大陆-www.ilib.cn-
属类:中国大陆-wenku.baidu.com-
属类:中国大陆-ilib.cn-
属类:中国大陆-www.ilib.cn-
属类:中国大陆-www.ilib.cn-
1 | 蒸汽喷射器噪声的产生与降噪优化设计 | Investigation on Noise and Optimum Design for Steam-Jet Ejector | |
2 | 蒸汽-水喷射混合器的设计与应用 | Design and Application of a Steam-water Ejector Mixer | |
3 | 制模工具.扁顶杆 | Tools for moulding-Flat ejector pins | |
4 | 制模工具.圆柱头顶杆的推顶套.一般用途的基本系列 | Tools for moulding-Ejector sleeves with cylindrical head-Basic series for general purposes | |
5 | 制模工具.圆柱头推杆 | Tools for moulding-Ejector pins with cylindrical head | |
6 | 铸模工具.带肩的脱模顶销 | Tools for moulding-Shouldered ejector pins | |
7 | 铸模工具.圆柱头脱模顶销 | Tools for moulding-Ejector pins with cylindrical head | |
8 | 铸模工具.圆柱头脱模顶销.一般用途的基本系列 | Tools for moulding-Ejector sleeves with cylindrical head-Basic series for general purposes | |
9 | 转盘式熔剂喷射机的结构特性 | Structural Features of Turntalble Flux Ejector | |
10 | DF喷射泵内力学特性研究 | Study on the mechanics characteristic of DF ejector | |
11 | RELEX软件在某型弹射弹故障树分析中的应用 | The Application of RELEX Software in Fault Analysis for Ejector Cartridge | |
12 | 氨水喷射-吸收式制冷循环的研究 | Study on ammonia ejector -absorption refrigeration cycle | |
13 | 被动式引射器内流场数值研究 | Numerical study on inner flow filed in passive ejector | |
14 | 波瓣喷管结构参数对引射混合器性能影响的数值研究 | Numerical Investigation on the Effects of Lobe Nozzle Geometric Parameters on Mixer-Ejector Performance | |
15 | 波瓣喷管双层壁扩压器流场的数值分析 | Numerical analysis of flow in a lobed exhaust-ejector with a double-wall diffuser | |
16 | 波瓣喷管引射-混合器涡结构的数值研究 | Numerical investigation of vortical structures in the lobed mixer-ejector | |
17 | 波瓣引射-混合器特性参数影响的数值研究和验证 | Computation and Validation of Parameter Effects on Lobed Mixer-Ejector Performances | |
18 | 长喉部射水抽气器带轴封冷却器的设计与研究 | The Design and Research Long Throat Water Jet Air Ejector with Gland Steam Condenser | |
19 | 超声速环型引射器启动特性试验研究 | Experimental investigation of the start performances of the supersonic annular ejector | |
20 | 带电动机成套(不带大气喷射器) | Complete set with motor (without air ejector ) | |
21 | 灯罩塑件二次顶出机构及尺寸计算 | A Second Ejector Mechanism for the Lamp Hood and the Calculation of the Relative Dimensions | |
22 | 低速条件下引射火箭实验研究 | An experimental investigation on rocket ejector at low speed | |
23 | 电-喷-泵技术在灰岩裂缝稠油油藏开发中的应用 | Application of Electric-Ejector -Pump Technology to the Development of Viscous Crude Oil Deposit in Limestone Fractures | |
24 | 调控水-水喷射加热机组在供热管网中的稳定性 | Hydraulic Stability of Conditioning-controlling Water-water Ejector Heating Unit in Heating System | |
25 | 顶杆小车给水系统改造 | Transformation of Water Supply System in a Buggy with an Ejector Rod | |
26 | 顶块顶件方式在注射模中的应用研究 | Application of Ejecting Manner of Ejector Inlaid-block in Injection Mould | |
27 | 顶针板弹簧使用是否安全 | Die Spring Ejector Plate Safety | |
28 | 二次流对超声速环型空气引射器真空度的影响 | The Effects of Second-flow on the Vacuum-degree of Annular Supersonic Air Ejector | |
29 | 二维流动模型的喷射器性能分析研究 | Numerical study of ejector performance with two-dimensional flow model | |
30 | 二维引射-混合器流场的数值研究与验证 | Numerical Computation and Examination of a Two-Dimensional Mixer-Ejector System |