Object parameter lists-Part 125: Elastomer mounts

事物特性表.第125部分:弹性体弹簧件

属类：行业标准名称-国际标准-DIN 4000-125-1999

Testing of plastics and elastomer films, paper, board and other sheet materials-Determination of water vapour transmission-Part 1: Gravimetric method

塑料和弹性薄膜、纸、纸板和其它板材试验.水蒸气渗透性的测定.第1部分:重力测定法

属类：行业标准名称-国际标准-DIN 53122-1-2001

CarboxilatedBuna is a general purpose oil resistant elastomer known as carboxylic-acrylonitrile-butadiene.

羰化丁腈橡胶的主要用途是作为抗油品腐蚀的弹性材料,称为羰基-丙烯腈-丁二烯。

属类：产品说明书-热水器说明-

Railway applications-Rubber suspension components-Elastomer -based mechanical parts

铁路设施.橡胶悬挂部件.弹性体基机械部件

属类：行业标准名称-国际标准-BS EN 13913-2003

Railway applications-Rubber suspension components-Elastomer -based mechanical parts;

铁路设施.橡胶悬挂部件.橡胶基机械部件

属类：行业标准名称-国际标准-DIN EN 13913-2003

This plug of extruded elastomer can be lodged in the throat so tightly that even 2000 psig of pressure will not dislodge it.

突出的人造橡胶会紧紧的堵在喉管处,即使2000psig的压力也不能把它移走。

属类：产品说明书-产品安全-

Non-metallic materials for surgical implants-Specification for surgical implants made of heat-vulcanized silicone elastomer

外科植入物用非金属材料.第3部分:热硫化硅弹性体制外科植入物规范

属类：行业标准名称-国际标准-BS 7253-3-1990

RUBBER AND SIMILAR ELASTOMERS. PYROLYTIC DETERMINATION OF CARBON BLACK OF ELASTOMER BASED COMPOUNDS.

橡胶.高温分解法测定合成橡胶混合物中碳黑的含量

属类：行业标准名称-国际标准-NF T46-104-1968

Elastomer mounts-Pot bearings and fail safe pot bearings, types A to G

橡胶-弹簧件.带和不带保险的罐形轴承.A型至G型

属类：行业标准名称-国际标准-DIN 95366-1996

Elastomer mounts-Cap mounts type A

橡胶弹簧组件.A型盖轴承

属类：行业标准名称-国际标准-DIN 95369-1998

Elastomer mounts-Cone mounts types A to C

橡胶弹簧组件.A至C型圆锥轴承

属类：行业标准名称-国际标准-DIN 95368-1998

MINIUM FOR THE ELASTOMER INDUSTRY.

橡胶工业原料.红铅粉

属类：行业标准名称-国际标准-NF T45-010-1972

RAW MATERIALS FOR THE ELASTOMER INDUSTRY. CARBON BLACK. DETERMINATION OF THE SIEVE RESIDUE.

橡胶工业原料.筛渣量的测定

属类：行业标准名称-国际标准-NF T45-134-1991

RAW MATERIALS FOR THE ELASTOMER INDUSTRY. PETROLEUM PLASTICISERS. DETERMINATION OF DENSITY-VISCOSITY.

橡胶工业原料.石油增塑剂.成分的测定.密度.粘度

属类：行业标准名称-国际标准-NF T45-012-1973

RAW MATERIALS FOR THE ELASTOMER INDUSTRY. PETROLEUM PLASTICISERS. DETERMINATION OF THE REFRACTION CONSTITUENT. DENSITY.

橡胶工业原料.石油增塑剂.成分的测定.折光度.密度

属类：行业标准名称-国际标准-NF T45-011-1973

Laboratory apparatus in rubber and plastics; elastomer stoppers

橡胶和塑料制实验仪器.橡胶塞

属类：行业标准名称-国际标准-DIN 12871-1983

Tools for pressing-Elastomer pressure springs-Part 1: General specification

压力设备.合成橡胶压力弹簧.第1部分:总规范

属类：行业标准名称-国际标准-DIN ISO 10069-1-2000

Tools for pressing-Elastomer pressure springs-Part 2: Specification of accessories

压力设备.合成橡胶压力弹簧.第2部分:附件的规范

属类：行业标准名称-国际标准-DIN ISO 10069-2-2000

Tools for pressing. Elastomer pressure springs. Part 1 : general specification.

压制工具.合成橡胶压力弹簧.第1部分:一般规范

属类：行业标准名称-国际标准-NF E63-134-1992

Tools for pressing. Elastomer pressure springs. Part 2 : specification of accessories.

压制工具.合成橡胶压力弹簧.第2部分:附件的规范

属类：行业标准名称-国际标准-NF E63-135-1992

Tools for pressing; elastomer pressure springs; part 1: general specification

压制用工具.合成橡胶压力弹簧.第1部分:一般规范

属类：行业标准名称-国际标准-ISO 10069-1-1991

Tools for pressing; elastomer pressure springs; part 2: specification of accessories

压制用工具.合成橡胶压力弹簧.第2部分:附件的规范

属类：行业标准名称-国际标准-ISO 10069-2-1991

Hydraulic fluid power; housings for elastomer -energized, plastic-faced seals; dimensions and tolerances; part 1: piston seal housings

液压传动 弹性体赋能塑料面密封沟槽 尺寸和公差 第1部分:活塞密封沟槽

属类：行业标准名称-ISO标准-

Hydraulic fluid power; housings for elastomer -energized, plastic-faced seals; dimensions and tolerances; part 2: rod seal housings

液压传动 弹性体赋能塑料面密封沟槽 尺寸和公差 第2部分:活塞杆密封沟槽

属类：行业标准名称-ISO标准-

Hydraulic fluid power; housings for elastomer -energized, plastic-faced seals; dimensions and tolerances; piston seal housings; identical with ISO 7425-1:1988

液压传动.弹性体塑料表面密封件的腔.尺寸和公差.第1部分:活塞密封腔

属类：行业标准名称-国际标准-DIN ISO 7425-1-1990

Hydraulic fluid power; housings for elastomer -energized, plastic-faced seals; dimensions and tolerances; rod seal housings; identical with ISO 7425-2:1989

液压传动.弹性体塑料表面密封件的腔.尺寸和公差.第2部分:活塞杆密封腔

属类：行业标准名称-国际标准-DIN ISO 7425-2-1990

Hydraulic fluid power-Housing for elastomer -energized, plastic-faced seals-Dimensions and tolerances-Rod seal housings

液压传动.弹性体塑料表面密封件的腔.尺寸和公差.活塞杆密封腔

属类：行业标准名称-国际标准-BS ISO 7425-2-2002

Hydraulic fluid power-Housing for elastomer -energized, plastic-faced seals-Dimensions and tolerances-Piston seal housings

液压传动.弹性体塑料表面密封件的腔.尺寸和公差.活塞密封腔

属类：行业标准名称-国际标准-BS ISO 7425-1-2002

INSULATING MATS MADE FROM NATURAL RUBBER OR SYNTHETIC ELASTOMER .

以天然橡胶或合成橡胶为基础的绝缘垫

属类：行业标准名称-国际标准-NF C18-420-1972

Preparation of Ethylene Propylene Diene Monomer/Polypropylene Thermoplastic Elastomer by Si 69 as Curing Agent

用Si 69作为硫化剂制备三元乙丙橡胶/聚丙烯热塑性弹性体

属类：行业术语-中文论文标题-