ENCLOSURES FOR PROTECTION AGAINST IONIZING RADIATION. LEAD SHIELDING UNITS FOR 150 MM, 200 MM AND 250 MM THICK WALLS. PART 1 : CHEVRON UNITS OF 150 MM AND 200 MM THICKNESS.

防电离辐射保护壳.厚度为150mm,200mm和250mm的铅防护壳.第1部分:厚度为150mm和200mm的波纹式防护壳

属类：行业标准名称-国际标准-NF M62-300-1992

Limiting enclosures . Principles of ventilation.

防护外壳.通风原理

属类：行业标准名称-国际标准-NF M62-201-1986

Protection of persons and equipment by enclosures . Probes for verification.

防护罩对人员和设备的保护.检验探针

属类：行业标准名称-国际标准-NF C20-013-1998

The analyzer unit consists of two enclosures

分析单元由二部分组成。

属类：综合句库--

Containment enclosures ? Part 2: Classification according to leak tightness and associated checking methods

封隔箱室?第二部分:根据密封性和有关的检测方法分级

属类：行业标准名称-试验方法-

Series of basic dimensions of panels,racks and enclosures for vertical increment of 44.45mm

高度进制为44.45mm的面板、机架和机柜的基本尺寸系列

属类：行业标准名称-国家标准名-GB/T3047.2-1992

Measurement of shielding effectiveness of high-performance shielding enclosures

高性能屏蔽室屏蔽效能的测量方法

属类：行业标准名称-国家标准名-GB/T12190-1990

Fibre optic enclosures -Part 1 : generic specification.

光纤附件.第1部分:总规范

属类：行业标准名称-国际标准-NF C93-827-1-2002

Nuclear facilities-Ventilation penetrations for shielded enclosures

核设施 屏蔽罩的通风

属类：行业标准名称-ISO标准-

Nuclear facilities-Ventilation penetrations for shielded enclosures .

核设施.屏蔽室的通风渗透性

属类：行业标准名称-国际标准-NF M62-234-2002

Nuclear facilities-Ventilation penetrations for shielded enclosures

核设施.屏蔽外罩的通风渗透性

属类：行业标准名称-国际标准-ISO 15080-2001

Mechanical vibration-Balancing machines-Enclosures and other protective measures for the measuring station

机械振动.平衡试验机.测量站用机罩和其他安全措施

属类：行业标准名称-国际标准-BS ISO 7475-2002

Mechanical vibration-Balancing machines-Enclosures and other protective measures for the measuring station

机械振动.平衡试验机.计量站用机罩和其他安全措施

属类：行业标准名称-ISO标准-

Cleanrooms and associated controlled environments-Part 7: Separative enclosures (clean air hoods, gloveboxes, isolators, mini-environments)(ISO/DIS 14644-7:2001

洁净室和相关控制环境第7部分:分离外壳(清洁排气罩、手套箱、绝缘子、小环境)

属类：行业标准名称-国际标准-prEN ISO 14644-7-2001

Be acceptable for portable, attended, intermittent-duty, household-use appliance enclosures (i.e., hair dryers)or for decorative parts.

可用于便携式、人工操作、间歇使用的家用电器外壳

属类：产品说明书--

Specification for cold-pour resin-based compound for use as a filling medium in terminating cables in enclosures for voltages not exceeding 11 kV for use in coal mines

煤矿用电压不超过11KV的作为外壳内连接电缆填充剂的冷浇树脂基化合物规范

属类：行业标准名称-国际标准-BS 7383-1990

Containment enclosures -Part 1: Design principles

密封箱.第1部分:设计原则

属类：行业标准名称-国际标准-ISO 10648-1-1997

Containment enclosures -Part 2: Classification according to leak tightness and associated checking methods

密封箱室 第2部分:密封性分级及其检验方法

属类：行业标准名称-ISO标准-

Components for containment enclosures -Part 1: Glove/bag ports, bungs for glove/bag ports, enclosure rings and interchangeable units

密封箱室部件 第1部分:手套/封袋接盘、手套/封袋孔盖、密封环和可更换装置

属类：行业标准名称-ISO标准-

Components for containment enclosures -Part 2: Gloves, welded bags, gaiters for remote-handling tongs and for manipulators

密封箱室部件 第2部分:手套、焊封袋、剑式机械手护套和主从机械手护套

属类：行业标准名称-ISO标准-

Components for containment enclosures -Part 3: Transfer systems such as plain doors, airlock chambers, double door transfer systems, leaktight connections for waste drums

密封箱室部件 第3部分:转运装置如简易门、前室、双盖门转运装置、废物桶密封连接件

属类：行业标准名称-ISO标准-

Components for containment enclosures -Part 4: Ventilation and gas-cleaning systems such as filters, traps, safety and regulation valves, control and protection devices

密封箱室部件 第4部分:通风和气体清洁系统,诸如:过滤器、捕获器、安全和调节阀、控制和保护器件

属类：行业标准名称-ISO标准-

Components for containment enclosures -Part 5: Penetrations for electrical and fluid circuits

密封箱室部件 第5部分:电循环系统和流体循环系统的渗透性

属类：行业标准名称-ISO标准-

Components for containment enclosures . Part 1 : glove/bag ports, bungs for glove/bag ports, enclosure rings and interchangeable units.

密封罩用组件.第1部分:手套/布袋口,手套/布袋盖,密封环和互换部件

属类：行业标准名称-国际标准-NF M62-301-1-1997

Components for containment enclosures . Part 2 : gloves, welded bags, gaiters for remote-handling tongs and for manipulators.

密封罩用组件.第2部分:机械手和遥控操作抓手用手套,焊接袋,鞋罩

属类：行业标准名称-国际标准-NF M62-301-2-1997

Components for containment enclosures -Part 3 : transfer systems such as plain doors, airlock chambers, double door transfer systems, leaktight connections for waste drums.

密封罩用组件.第3部分:光面门用传送系统、气闸室、双开门用传送系统和废鼓形容器的密封连接

属类：行业标准名称-国际标准-NF M62-301-3-2000

Components for containment enclosures -Part 4: Ventilation and gas-cleaning systems such as filters, traps, safety and regulation valves, control and protection devices

密封罩用组件.第4部分:通风和气体清洁系统(如,过滤器和疏水阀)的安全和规定.阀门、控制和保护装置

属类：行业标准名称-国际标准-ISO 11933-4-2001

Components for containment enclosures -Part 4 : ventilation and gas-cleaning systems such as filters, traps, safety and regulation valves, control and protection devices.

密封罩用组件.第4部分:通风和气体清洁系统(如:过滤器和疏水阀)的安全和调节阀门以及控制和保护装置

属类：行业标准名称-国际标准-NF M62-301-4-2001

Components for containment enclosures -Part 5: Penetrations for electrical and fluid circuits

密封罩用组件.第5部分:电路和液压管路的渗透性

属类：行业标准名称-国际标准-ISO 11933-5-2001

Containment enclosures -Part 2: Classification according to leak tightness and associated checking methods

密封装置.第2部分:根据密封度用辅助校准法分类

属类：行业标准名称-国际标准-ISO 10648-2-1994