The regeneration, heating, and cooling sections of the pasteurization system are heat exchangers .

巴氏杀菌设备的回流、加热和冷却段均为热交换器。

属类：工程技术-食品工程-

In shell-and-tube exchangers , many tubes are mounted inside a shell; one fluid flows in the tubes and the other flows in the shell, outside the tubes.

而在管壳式热交换器中,把许多管子封装在一个壳内,一种流体在管子内流动,另一种流体则在壳内、管子外的间隙流动。

属类：化学及生命科学-化学-

Steel tubes. Seamless tubes for heat exchangers . Stainless ferritic, austenic or ferritoaustenitic steel grades. Dimensions. Technical delivery conditions.

钢管.热交换器用无缝管.奥氏体不锈钢和铁素体钢.(尺寸.交货技术条件.)

属类：行业标准名称-国际标准-NF A49-217-1987

Steel tubes. Tubes welded longitudinally for heat exchangers . Austenitic stainless steels. Dimensions. Technical delivery conditions.

钢管.热交换器用纵向焊接钢管.奥氏体不锈钢.尺寸.交货技术条件

属类：行业标准名称-国际标准-NF A49-247-1981

Tubular heat exchangers ; connections tube to tube sheet

管束式热交换器.管与底板紧固连接

属类：行业标准名称-国际标准-DIN 28187-1991

Tubular heat exchangers ; tube pitches, diameter of bores in tube sheets, baffles and support plates

管束式热交换器.管子分布.管底座钻孔直径.导向扇形块和支承板

属类：行业标准名称-国际标准-DIN 28182-1987

Welded steel tubes for tubular heat exchangers ; dimensions, dimensional deviations and materials

管束式热交换器的焊接钢管.尺寸.尺寸偏差和材料

属类：行业标准名称-国际标准-DIN 28181-1985

Seamless steel tubes for tubular heat exchangers ; dimensions, dimensional deviations and materials

管束式热交换器的无缝钢管.尺寸.尺寸偏差和材料

属类：行业标准名称-国际标准-DIN 28180-1985

Steel U-tubes for tubular heat exchangers ; technical delivery conditions

管束式热交换器用钢制U型管.交货技术条件

属类：行业标准名称-国际标准-DIN 28179-1989

Elastic pass partition gaskets for tubular heat exchangers

管束用橡胶隔板密封.热交换器

属类：行业标准名称-国际标准-DIN 28192-1994

Tubular heat exchangers ; tube bundle components

管原式热交换器.管壳安装

属类：行业标准名称-国际标准-DIN 28185-1988

Steel tubes for boilers, superheaters and heat exchangers ; Dimensions, tolerances and conventional masses per unit length

锅炉、过热器和热交换器用钢管 尺寸、公差和单位常用重量

属类：行业标准名称-ISO标准-

Steel tubes for boilers, superheaters and heat exchangers ; Dimensions, tolerances and conventional masses per unit length

锅炉、过热器和热交换器用钢管材.尺寸、公差和常规单位长度的重量

属类：行业标准名称-国际标准-ISO 1129-1980

Properly designed heat exchangers substantially improve the contacting in the bed by breaking up growing bubbles

合理设计的热交换器能使长大的气泡破碎,以有效地改善床层中的接触。

属类：综合句库--

Noise Measurement on Machines; Airborne Noise Measurement, Enveloping Surface Method, Air-cooled Heat Exchangers (Air Coolers)

机器噪声测量.空气载声测量.包面法.气冷热交换器(空气冷却器)

属类：行业标准名称-国际标准-DIN 45635-14-1980

Specification for vessels for use in heating systems-Tubular heat exchangers and storage vessels for building and industrial services

集中供暖系统用压力容器规范.第2部分:建筑业和工业设施用管式热交换器和蓄热器

属类：行业标准名称-国际标准-BS 853-2-1996

Almost all chemical systems involve heat transfer at some stage, especially in heat exchangers . as these examples illustrate, transfer principles describe much of what goes on around us.

几乎所有化工系统都在某个阶段包含着热量传递,尤其是在换热器中。这些例子表明,传递原理描述了发生在我们身边的许多现象。

属类：化学及生命科学-化工-化工原理与技术

The air then passes through heat exchangers where it is cooled to cryogenic temperature.

接着空气通过热交换器冷却到低温。

属类：产品说明书-产品安全-

Tolerances for construction of tubular heat exchangers

壳管式换热器的尺寸和公差

属类：行业标准名称-国际标准-DIN 28008-1983

Tubular heat exchangers ; nomenclature

壳管式热交换器.名称

属类：行业标准名称-国际标准-DIN 28183-1988

Air is compressed and sent through a clean-up system where moisture, carbon dioxide, and hydrocarbons are removed. The air then passes through heat exchangers where it is cooled to cryogenic temperature.

空气通过一个去除了水蒸气、二氧化碳和碳氢化合物的清洁系统压缩和输运。接着空气通过热交换器冷却到低温。

属类：产品说明书-产品安全-

Caustic Soda Solution for Water Treatment for Regeneration of Ion Exchangers ; Technical Conditions of Delivery

离子交换剂再生水处理用苛性钠溶液.交货技术条件

属类：行业标准名称-国际标准-DIN 19616-2-1971

Testing of ion exchangers ; recycling method for testing ion exchangers and polymer adsorption resins

离子交换器的检验.泵压送法及用聚合物的吸附作用检验离子交换器

属类：行业标准名称-国际标准-DIN 54411-1987

Testing of ion exchangers (bead form)-Determination of resistance to osmotic and hydromechanical stress

离子交换器的试验(珠承型).抗渗透和流体力学应力的性能测定

属类：行业标准名称-国际标准-DIN 54406-2000

Testing of ion exchangers -Determination of bulk weight density, equilibrium moisture content and solids

离子交换器检验.堆积密度,平衡湿度和干燥物料成份的测定

属类：行业标准名称-国际标准-DIN 54408-1998

Testing of ion exchangers ; determination of density

离子交换器检验.密度测定

属类：行业标准名称-国际标准-DIN 54410-1985

Testing of ion exchangers -Determination of the total capacity of cation exchangers

离子交换器检验.阳离子交换器总效能测定

属类：行业标准名称-国际标准-DIN 54403-2001

Testing of ion exchangers -Determination of the total capacity of anion exchangers

离子交换器检验.阴离子交换器总效能测定

属类：行业标准名称-国际标准-DIN 54402-2001

Testing of ion exchangers (bead form)-Sampling

离子交换器试验(珠承型).取样

属类：行业标准名称-国际标准-DIN 54401-2000

Fixed head heat exchangers with type 20 tubes and triangular 25 tube pitch; number and pattern of tubes

两端固定的壳管式热交换器.内管直径20.三角管心距25.内管的数目和配置

属类：行业标准名称-国际标准-DIN 28184-4-1988