Aerospace series-Titanium alloy TI-B17001-Filler metal for brazing-Rolled foil.

航空航天系列.钛合金TI-B17001.钎焊用填充金属.滚轧箔

属类：行业标准名称-国际标准-NF L13-148-2001

Aerospace series-Copper CU-BU9001-Filler metal for brazing-Rolled foil.

航空航天系列.铜CU-BU9001.钎焊用填充金属.滚轧箔

属类：行业标准名称-国际标准-NF L13-146-2001

Aerospace series-Copper CU-BU9001-Filler metal for brazing-Wire.

航空航天系列.铜CU-BU9001.钎焊用填充金属.焊丝

属类：行业标准名称-国际标准-NF L13-147-2001

Aerospace series-Silver base alloy AG-B10001 (AgCu28)-Filler metal for brazing-Wire.

航空航天系列.银基合金AG-B10001(AgCu28).钎焊用充填金属.焊丝

属类：行业标准名称-国际标准-NF L13-135-2001

Aerospace series-Silver base alloy AG-B12401 (AgCu40Zn5Ni)-Filler metal for brazing-Powder or paste.

航空航天系列.银基合金AG-B12401(AgCu40Zn5Ni).钎焊用充填金属.粉末或糊状物

属类：行业标准名称-国际标准-NF L13-137-2001

Aerospace series-Silver base alloy AG-B12401 (AgCu40Zn5Ni)-Filler metal for brazing-Wire.

航空航天系列.银基合金AG-B12401(AgCu40Zn5Ni).钎焊用充填金属.焊丝

属类：行业标准名称-国际标准-NF L13-136-2001

Aerospace series-Silver base alloy AG-B12401 (AgCu40Zn5Ni)-Filler metal for brazing-Rolled foil.

航空航天系列.银基合金AG-B12401(AgCu40Zn5Ni).钎焊用填充金属.卷状箔

属类：行业标准名称-国际标准-NF L13-138-2001

Aerospace series-Silver base alloy AG-B14001 (AgCu42Ni2)-Filler metal for brazing-Powder or paste.

航空航天系列.银基合金AG-B14001(AgCu42Ni2).钎焊用填充金属.粉末或糊状物

属类：行业标准名称-国际标准-NF L13-140-2001

Aerospace series-Silver base alloy AG-B14001 (AgCu42Ni2)-Filler metal for brazing-Wire.

航空航天系列.银基合金AG-B14001(AgCu42Ni2).钎焊用填充金属.焊丝

属类：行业标准名称-国际标准-NF L13-139-2001

Aerospace series-Silver base alloy AG-B14001 (AgCu42Ni2)-Filler metal for brazing-Rolled foil.

航空航天系列.银基合金AG-B14001(AgCu42Ni2).钎焊用填充金属.卷状箔

属类：行业标准名称-国际标准-NF L13-141-2001

AEROSPACE SERIES. LUBRICATING DRY FLUOROCARBONATED WITHOUT BINDING MATERIAL OR FILLER , MAXIMUM THICKNESS OF 10 MICROMETER ON METALLIC SUBSTRATE. QUALITY OF COATED PARTS.

航空和航天.最大厚度10千分尺的金属衬底表面用不带有粘结材料或填料的干式氟碳润滑剂.涂层配件的质量

属类：行业标准名称-国际标准-NF L10-200-1995

Aerospace series-Nickel base alloy NI-B46001 (NiCo20Si5B3)-Filler metal for brazing-Amorphous foil.

航空系列.镍基合金 Ni-B46001.非晶态箔

属类：行业标准名称-国际标准-NF L13-121-2001

The tank filler sleeve is stuck.

加油孔被堵塞了。

属类：综合句库--

Do not handle cylinders roughly or carelessly to prevent damage to the cylinder or the filler . Dropping cylinders can cause leaks to develop at fuse plugs.

禁止粗暴或漫不经心地操作钢瓶,以防止损伤钢瓶或填充物。钢瓶跌倒会导致保险塞处泄漏。

属类：产品说明书-产品安全-

Foamed polyurethanes, used for insulation and mattress and upholstery filler , are made with organic compounds containing carboxyl groups, causing a reaction that liberates carbon dioxide bubbles throughout the product.

聚氨酯泡沫用含羧基的有机化合物制成,异氰酸酯与这类化合物反应时会释放出二氧化碳,在产品中形成气泡。

属类：化学及生命科学-化学-

It is used as an alloying agent and in other metallurgical applications; its alloy with lead is used in cable sheathing and grids for batteries. Calcite is used as a lime source, a filler , a neutralizer, and an extender; in pure form it is used in baking powder and as an antacid and calcium supplement.

可作为合金添加剂和应用在其它冶金方面。与铅组成的合金可用作电话电缆包皮和蓄电池铅板。碳酸钙可作为石灰的来源、填料、中和剂和混合剂。合成的碳酸钙常用于纯度要求很高的医药上(抗酸剂、饮食补充钙、牙膏)和食物中(作发酵粉)以及实验室化学合成等。

属类：化学及生命科学-化学-

Air in system. If air gets into the hydraulic system, poor braking and a spongy pedal will result. It is possible accidentally to plug the vent (By wrench action)when the filler plug is removed.

空气进入系统:如果空气进入液压系统,就会产生制动不良和踩下踏板不能产生制动力。也可能是拆卸加注口螺栓时,(用扳手不当)偶然堵住排气口所至。

属类：工程技术-汽车-

ALUMINIUM AND ALUMINIUM ALLOYS. WELDING,BRAZING AND BRAZE WELDING. BASE MATERIALS AND SELECTION OF FILLER MATERIALS.

铝和铝合金.焊接、硬钎焊和钎焊.基础产品和焊条的选择

属类：行业标准名称-国际标准-NF A81-410-1984

Early cylinders were completely filled with a porous filler material consisting of diatomaceous earth, charcoal, asbestos, and cement.

每个钢瓶都彻底填满了由硅藻土、木炭、石棉和水泥组成的多孔渗水材料。

属类：产品说明书-产品安全-

Present-day cylinder shave a silica lime filler to which some manufacturers add asbestos, charcoal, and other materials to provide a lightweight filler with a higher porosity.

目前的钢瓶采用切成薄片的硅土石灰填充物,一些生产商在里面加入石棉、木炭和其它物质来得到多孔性更高的重量很轻的填充物。

属类：产品说明书-产品安全-

Braze welding filler metals. Determination of the conventional tensile strength of the bond to steel, cast iron and other metals.

钎焊用填充金属.钢、铸铁和其它金属连接的常用抗拉强度的测定

属类：行业标准名称-国际标准-NF A89-421-1979

fuel-tank filler access

燃油箱加油窗口, 燃油加油口

属类：综合句库-英汉综合-

Filler rods for gas welding of mild steels and low alloy high tensile steels-Determination of mechanical properties of deposited weld metal

软钢、低合金高强度钢气焊用焊条--堆焊金属的力学性能的测定

属类：行业标准名称-试验方法-

Filler metal for soft soldering, brazing and braze welding; designation

软钎焊、硬钎焊和钎接焊接用填充金属 符号规定

属类：行业标准名称-ISO标准-

FILLER METAL FOR SOFT SOLDERING, BRAZING AND BRAZE WELDING. DESIGNATION. (EUROPEAN STANDARD EN ISO 3677).

软钎焊、硬钎焊接和铜焊用填充金属.命名

属类：行业标准名称-国际标准-NF A81-369-1995(欧洲标准EN ISO 3677)

constructional goods ,ceramic ,non heat-insulating or refractory (excl.building bricks,blocks and filler or support tiles,pipes,conduits,guttering and pipe fittings)

陶瓷建筑制品,非隔热或耐火的(不包括建筑砖-砌块以及填充或支撑面砖、管子、导线管、雨槽管和管子配件)

属类：物品名称-一般商品-陶瓷制品

The filler materials must be correctly proportioned to provide a homogenous mass in such a manner as to completely fill the shell within the maximum clearances specified by DOT to resist cracking of filler during rough handling of the cylinder.

填充材料必须比例正确,形成均匀同质物,在DOT规定的最大空间内完全填满瓶体,以防止在粗暴操作钢瓶过程中填充物的破裂。

属类：产品说明书-产品安全-

A substance added to something else;a filler .

填充物加之于他物的物质;填料

属类：综合句库--

Fibre-reinforced plastics-Moulding compounds and prepregs-Determination of resin, reinforced-fibre and mineral-filler content-Dissolution methods

纤维增强塑料 模塑料和预浸料 树脂、增强纤维和矿物质填料含量的测定 溶解法

属类：行业标准名称-ISO标准-

Unbaking powder,the two reactive constituents are blended with a filler which consists of corn, rice, wheat or tapioca starch or just wheat flour.

在焙烤粉中,将面种反应组分同一种含有玉米、大米、小麦或木薯淀粉或适当的小麦面粉的填充料混合。

属类：工程技术-食品工程-