The cold rolled coils are delivered from cold rolling mill into the hot dip galvanizing workshop. The coils leave hot dip galvanizing workshop in form of galvanized coils as final product.

冷轧卷从冷轧车间送至热镀锌车间,成品镀锌卷离开热镀锌车间。

属类：商务文书-协议-

The cold rolled coils entered into hot dip galvanizing workshop are put on waiting position and then transferred to uncoiler by coil car.

冷轧卷进入热镀锌车间后置于待处理位置,然后通过上卷小车送至开卷机。

属类：商务文书-协议-

The Analysis for Thermal Process Modeling of Continuous Hot Dip Galvanizing Annealing Furnace

连续热镀锌退火炉内热过程数学模型及其分析

属类：行业术语-中文论文标题-

Causes and Prevention of Oil Floating and cloudiness of the Galvanizing Solution Containg KCI

氯化钾镀液浮油、混浊原因及预防

属类：行业术语-中文论文标题-

The Buyer agrees to buy from the Seller and the Seller agrees to sell to the Buyer the Equipment and Galvanizing Technology with the capacity 150,000.00 tons/year and technical and technological parameters specified in Appendix 1 and Appendix 2 to this Contract in accordance with the terms and conditions set forth in this Contract.

买方同意依据本合同规定的条件向卖方购买并且卖方同意依据本合同规定的条件向买方出售年产150,000.00吨热镀锌生产线设备及镀锌技术,技术和工艺参数见本合同附件一和附件二中的规定。

属类：商务文书-合同-购买生产线合同

The Seller shall provide the training to the buyer’s personnel on the line for galvanizing plate which has similar technical and technological characteristics as the line which is the subject of the Contract, in the scope and to the extent as defined in Clause 2.3. hereof.

卖方必须在与合同的镀锌线有相似技术、工艺特性的镀锌线上,以2.3规定的范围和内容培训买方的人员。

属类：商务文书-合同-购买生产线合同

Intends to purchase an on-line equipment of hot dip galvanizing production line and galvanizing technology from China National Metals & Minerals Import & Export Corporation (hereinafter abbreviated as MINMETALS), with an export credit arrangement provided by the Export-Import Bank of China

拟通过由中国进出口银行安排的出口信贷向中国五金矿产进出口总公司(以下缩写为"五矿"),购买一条热镀锌生产线在线设备及相关镀锌技术

属类：商务文书-合同-购买生产线合同

A Discussion about the Quality of the Raw Material of the Galvanizing Wire and Its Galvanized Layer for Bridge Cables

桥梁缆索镀锌钢丝原料及锌层质量研讨

属类：行业术语-中文论文标题-

Effects of the Hot-Dip Galvanizing Time on Steel Wire's Mechanical Properties

热镀锌钢丝浸锌时间对机械性能的影响

属类：行业术语-中文论文标题-

Design of Roll Shape for Temper Mill of Hot Galvanizing Line

热镀锌光整机辊型曲线设计

属类：行业术语-中文论文标题-

The Operational Control of Thick Product for Galvanizing Set

热镀锌机组厚规格产品生产中的控制

属类：行业术语-中文论文标题-

On-line equipment, industrial furnaces, automation equipment, measuring instrumentation system, pre-cleaning and passivation equipment, hydraulic system, lubrication system and protective gas generation station of continuous hot dip galvanizing line.

热镀锌线的在线设备,工业炉,自动化设备,测试仪器系统,预清洗及钝化设备,液压系统,润滑系统及保护气体发生站。

属类：商务文书-合同-购买生产线合同

Effect of Additives on Zinc Electrorefining from Hot Galvanizing Slag

热镀锌渣电解精炼中添加剂的研究

属类：行业术语-中文论文标题-

Interpretation Model of Sandelin Effect Mechanism in Hot Dip Galvanizing

热镀锌中圣德林效应微观机理的解释模型

属类：行业术语-中文论文标题-

A layer of hot-dipped galvanizing causes a considerable reduction in the fatigue strength

热浸镀锌层引起疲劳强度的显著降低。

属类：综合句库--

Anti-corrosion Mechanism and Service Life of Hot Dip Galvanizing

热浸镀锌防蚀原理与寿命

属类：行业术语-中文论文标题-

hot dip galvanizing bolts and nuts

热浸镀锌螺丝、螺帽

属类：物品名称-五金产品-

Standard Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing

热浸镀锌用锌母合金的标准规范

属类：行业标准名称-国际标准-ASTM B 860-2001

Research and Practice on Fluxing Technology for Hot Dip Galvanizing

热浸镀锌助镀工艺的研究与应用

属类：行业术语-中文论文标题-

Research and Practice of Low Aluminum Addition for Hot Galvanizing Bath

热浸锌浴中少量铝对镀层性能的影响

属类：行业术语-中文论文标题-

The Equipment: shall mean the on-line equipment of hot dip galvanizing production line listed in Appendix 2 to this Contract and to be purchased by the buyer from the Seller under this Contract.

设备:指买方依据本合同向卖方购买的本合同附件二中所列的热镀锌生产线的在线设备

属类：商务文书-合同-购买生产线合同

All the water pipes need galvanizing

所有这些水管都需要镀锌。

属类：综合句库--

Iron and steel. Steel for hot dip galvanizing .

铁和钢.热浸没的镀锌钢

属类：行业标准名称-国际标准-NF A35-503-1994

Affection of Annealing Furnace Ability on Galvanizing Sheet Output

退火炉设备能力对镀锌产量的影响

属类：行业术语-中文论文标题-

Application of Zn-Ni Alloys to Hot Galvanizing Process

锌镍合金在热镀锌工艺中的应用问题

属类：行业术语-中文论文标题-

This welder type has been selected for many of the recent galvanizing lines and produces a high quality, thin joint.

许多现代镀锌线都是选用这种焊机,焊缝质量高且薄。

属类：工程技术-冶金-

Normally, corrosion products (e.g., rust, patina)stay on the surface and protect it. Removing these deposits reexposes the surface, and corrosion continues. Some materials resist corrosion naturally; others can be treated to protect them (e.g., by coating, painting, galvanizing , or anodizing).

一般腐蚀产物(例如锈、铜绿)会停留在金属表面,并加以保护。移去这些堆积物让表面重新暴露,腐蚀会继续进行。有些材料天生抗腐蚀,其它的可以加工处理加以保护(例如披覆、油漆,镀锌或阳极氧化)。

属类：化学及生命科学-化学-

ISO general purpose metric screw threads-Tolerances-Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing

一般用途ISO米制螺纹.公差.第4部分:与由镀锌后公差位置为H或G攻出的内螺纹相匹配的热浸镀锌外螺纹的尺寸限

属类：行业标准名称-国际标准-DIN ISO 965-4-2002

ISO general purpose metric screw threads-Tolerances-Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing

一般用途ISO米制螺纹.公差.第5部分:与镀锌前最大公差位置为H的热浸镀锌外螺纹相匹配的内螺纹的尺寸限制

属类：行业标准名称-国际标准-DIN ISO 965-5-2002

ISO general purpose metric screw threads-Tolerances-Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing

一般用途米制螺纹. 公差.第5部分:与镀锌前最大公差位置为H的热浸镀锌外螺纹相匹配的内螺纹的尺寸限制

属类：行业标准名称-国际标准-ISO 965-5-1998