If the foam is broken, replace with new foam inserts or repair with two-inch (5.08 cm)?wide pressure sensitive tape.

如果泡沫已经破裂，请使用新的泡沫插入材料进行替换，或使用两英寸(5.08 厘米)宽的感压胶带进行修复。

属类：单位简介-物流公司网站-UPS运输包裹追踪

If the foam is damaged, replace it with new foam inserts or repair with two-inch (5.08 cm)wide pressure sensitive tape.

如果泡沫已经受损，请使用新的泡沫插入材料进行替换，或使用两英寸(5.08 厘米)宽的压敏胶带进行修复。

属类：单位简介-物流公司网站-UPS运输包裹追踪

Provided that where the holder in good faith and by mistake inserts a wrong date

如有下列情形执票人因无心之失而误填不确日期

属类：法学专业-香港法规-票据条例

Radiator grille painted in black with chrome inserts and integral Mercedes star

散热器护栅为黑色，带镀铬衬垫及镶上三叉星徽

属类：单位简介-汽车公司网站-产品介绍

Transformation efficiency is greatest with circular plasmids containing only small inserts of passenger DNA

使用带有一小段客座DNA的插入序列的环状质粒进行转化，较率会最高。

属类：综合句库--

Use of in-house bolsters thereby only requiring cavity inserts to be purchased.

使用自产模具垫板，仅型腔镶块需外购

属类：单位简介-公司简介实例-外国公司

disc,cutting,toothless,for hand or machine saws (excl. discs fitted with abrasive rims or peripheral inserts )

手锯或机用锯切削盘,无齿的(不包括装配有磨配边或周边镶齿的圆盘)

属类：物品名称-五金用品-

He quickly inserts the catheter

他很快将导液管插入。

属类：综合句库--

Indexable inserts for cutting tools--Ceramic inserts with rounded corners--Dimensions of inserts with cylindrical fixing hole

陶瓷可转位刀片带孔刀片尺寸

属类：机械模具-机械模具-机械术语

Indexable inserts for cutting tools--Ceramic inserts with rounded corners--Specifications

陶瓷可转位刀片技术条件

属类：机械模具-机械模具-机械术语

Indexable inserts for cutting tools--Ceramic inserts with rounded corners--Dimensions of inserts without fixing hole(Class G)

陶瓷可转位刀片无孔刀片尺寸(G级)

属类：机械模具-机械模具-机械术语

Indexable inserts for cutting tools--Ceramic inserts with rounded corners--Dimensions of inserts without fixing hole(Class U)

陶瓷可转位刀片无孔刀片尺寸(U级)

属类：机械模具-机械模具-机械术语

Combination cold and hot water fittings are factory installed for ease of installation and energy savings. Do not remove the inserts in the fittings.

为了便于热水器的现场安装和能源的节约,冷水出口和热水出口接头组件都在工厂安装。不要拆卸这些接头组件。

属类：产品说明书-洁具说明-

Indexable hardmetal (carbide)inserts with rounded corners, without fixing hole; Dimensions

无固定孔的修圆角的可转位硬质合金(碳化)刀片 尺寸

属类：行业标准名称-ISO标准-

Indexable hard metal (carbide)inserts with rounded corners,without fixing hole--Dimensions

无孔的硬质合金可转位刀片

属类：行业标准名称-国家标准名-GB/T2079-1987

MILLING CUTTERS. DESIGNATION. PART 2 : SHANK TYPE AND BORE TYPE MILLING CUTTERS WITH INDEXABLE INSERTS .

铣刀.名称.第2部分:带可分度镶嵌刀片的柄式铣刀和带孔铣刀

属类：行业标准名称-国际标准-NF E66-266-2-1998

Milling cutters-Designation-Part 2: Shank-type and bore-type milling cutters with indexable inserts

铣刀.名称与符号.第2部分:可分度刀片的柄式和孔式铣刀

属类：行业标准名称-ISO标准-

Polycristalline diamond inserts , tipped-Dimensions, types

镶片多晶体金刚石镶齿.尺寸、类型

属类：行业标准名称-ISO标准-

Cubic boron nitride inserts , tipped or solid-Dimensions, types

镶片或实心立方形氮化硼镶齿.尺寸、类型

属类：行业标准名称-ISO标准-

A general purpose adapter that inserts or removes control information and converts message data into an appropriate form for the terminal in which it is used

一种通用的适配器,可插入或删除控制信息并将信息数据转换成与使用它的终端相适合的形式。

属类：综合句库--

MILLING CUTTERS WITH HARDMETAL INDEXABLE INSERTS . SIDE AND FACE MILLING CUTTERS.

硬金属活动刀片铣刀.三面刃铣刀

属类：行业标准名称-国际标准-NF E66-255-1982

Indexable hard metal (carbide)inserts with wiper edges,without fixing hole--Dimensions

硬质合金可转位铣刀片

属类：行业标准名称-国家标准名-GB/T2081-1987

Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole-Dimensions

有部分圆柱形固定孔和圆角的可转位硬质合金刀片 尺寸

属类：行业标准名称-ISO标准-

Classification and designation of approximate chip control zones for indexable inserts with chipbreakers

有断屑器可分度到片的近似屑控制区的分类和命名

属类：行业标准名称-ISO标准-

Indexable hardmetal (carbide)inserts with rounded corners, with cylindrical fixing hole-Dimensions

有圆柱形固定孔和圆角的可转位硬质合金(碳化)刀片 尺寸

属类：行业标准名称-ISO标准-

Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole. Dimensions.

有圆柱形固定孔和圆角的可转位硬质合金刀片.尺寸

属类：行业标准名称-国际标准-NF E66-308-1998

End mills with indexable inserts . Part 1 : end mills with flatted parallel shank.

有转位刀片的立铣刀.第1部分:扁平直柄立铣刀

属类：行业标准名称-国际标准-NF E66-252-1-1996

End mills with indexable inserts . Part 2 : end mills with morse taper shank.

有转位刀片的立铣刀.第2部分:莫氏锥柄立铣刀

属类：行业标准名称-国际标准-NF E66-252-2-1996

Face milling cutters with indexable inserts . Dimensions.

有转位刀片的面铣刀.尺寸

属类：行业标准名称-国际标准-NF E66-253-1996

At certain cadential points,[ he inserts brief cadenzas that add an improvisational touch(Boris Schwarz)

在某些节拍上，[他]加入一些简单的用于即席弹奏的装饰乐段鲍里斯·施瓦茨)

属类：综合句库--