At the present time retainers are being manufactured of phenolic laminates and porous nylons, but other materials ranges are being investigated

目前,保持架是用酚板和多孔的尼龙制造的,但其他材料也在进行研究中。

属类：综合句库--

Specification for decorative continuous laminates (DCL)based on thermosetting resins

热固性树脂基装饰性连续叠层板材规范

属类：行业标准名称-国际标准-BS 7332-1990

DECORATIVE HIGH-PRESSURE LAMINATES (HPL). SHEETS BASED ON THERMOSETTING RESINS. PART 1 : SPECIFICATIONS. (EUROPEAN STANDARD EN 438-1).

饰面用高压层压板(HPL).热固性树脂板.第1部分:规格

属类：行业标准名称-国际标准-NF T54-301-1-1991(欧洲标准 EN 438-1)

DECORATIVE HIGH-PRESSURE LAMINATES (HPL). SHEETS BASED ON THERMOSETTING RESINS. PART 2 : DETERMINATION OF PROPERTIES. (EUROPEAN STANDARD EN 438-2).

饰面用高压层压板(HPL).热固性树脂板.第2部分:特性测定.

属类：行业标准名称-国际标准-NF T54-301-2-1991(欧洲标准 EN 438-2)

Plastics-Determination of temperature of deflection under load-Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics

塑料-测定耐热成型温度.第3部分:高强度热固性叠层板和长纤维增强塑料

属类：行业标准名称-国际标准-DIN EN ISO 75-3-1996

Plastics-Determination of temperature of deflection under load-Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics

塑料-载荷下挠曲温度的测定.第3部分:高强度热固性叠层板和长纤维增强塑料

属类：行业标准名称-ISO标准-

Plastics-Determination of temperature of deflection under load-Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics

塑料载荷下挠曲温度的测定第3部分:高强度热固性叠层板和长纤维增强塑料

属类：行业标准名称-国际标准-EN ISO 75-3-1996

Plastics. Determination of temperature of deflection under load. Part 3 : high-strength thermosetting laminates and long-fibre reinforced plastics.

塑料-载荷下偏转温度的测定.第3部分:高强度热固性叠层板和长纤维增强塑料

属类：行业标准名称-国际标准-NF T51-005-3-1996

Studies on Physical Properties of Composite Laminates Base Paper Made Form Kevlar Fiber

探讨克维拉制积层板用原纸之物理性质

属类：行业术语-中文论文标题-

Carbon fibre reinforced plastics-Unidirectional laminates -Flexural test parallel to the fibre direction

碳素纤维增强塑料.单向层压塑料.与纤维方向平行的弯曲试验

属类：行业标准名称-国际标准-BS EN 2562-1997

Carbon fibre reinforced plastics-Undirectional laminates -Tensile test parallel to the fibre direction

碳素纤维增强塑料.单向塑料层压制品.纤维方向平行抗拉试验

属类：行业标准名称-国际标准-BS EN 2561-1995

Analysis on Time-dependence Deformation of Concrete Beams Strengthened with CFRP Laminates

碳纤维布加固混凝土梁时效变形分析

属类：行业术语-中文论文标题-

Carbon fibre reinforced plastics-Unidirectional laminates -Tensile test perpendicular to the fibre direction

碳纤维叠层板材.单向叠层板材.垂直于纤维方向的拉伸试验

属类：行业标准名称-国际标准-BS EN 2597-1998

Carbon fibre laminates -Determination of the fibre, resin and void contents

碳纤维叠层板材.纤维、树脂含量和空隙率的测定

属类：行业标准名称-国际标准-BS EN 2564-1998

Carbon fibre reinforced plastics-Unidirectional laminates -Determination of the apparent interlaminar shear strength

碳纤维增强塑料.单向层压板.层间表面剪切强度的测定

属类：行业标准名称-国际标准-BS EN 2563-1997

Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water

纤维板暴露在热和水条件下粘结强度测定的标准试验方法

属类：行业标准名称-国际标准-ASTM D 5824-1998

Test method for compressive properties of fiber reinforced plastic thin laminates

纤维增强塑料薄层板压缩性能试验方法

属类：行业标准名称-国家标准名-GB/T5258-1995

Test method for tension--tension fatigue of fiber reinforced plastic laminates

纤维增强塑料层合板拉-拉疲劳性能试验方法

属类：行业标准名称-国家标准名-GB/T16779-1997

Decorative high-pressure laminates (HPL)sheets based on thermosetting resins-Specifications

以热固树脂为基质的装饰用高压层压装饰板(HPL).规范

属类：行业标准名称-国际标准-BS EN 438-1-1991

Decorative high-pressure laminates (HPL)sheets based on thermosetting resins-Determination of properties

以热固树脂为基质的装饰用高压层压装饰板(HPL).特性测定

属类：行业标准名称-国际标准-BS EN 438-2-1991

Standard Test Methods for Copper-Clad Thermosetting Laminates for Printed Wiring Boards

印刷线路板用铜覆层热固层压材料的标准试验方法

属类：行业标准名称-国际标准-ASTM D 5109-1999

Specification for Copper-Clad Thermosetting Laminates for Printed Wiring

印制线路用镀铜热固层压板规范

属类：行业标准名称-国际标准-ANSI/ASTM D 1867-1997

Plastic Laminates Made from Woven-Roving and Woven-Yarn Glass Fabrics

用粗纺丝和玻璃纤维丝分层压制成的塑料制品

属类：行业标准名称-国际标准-ASTM D 4357-1996

Laminates of textile glass-reinforced unsaturated polyester and phenacrylic resins for load-bearing structural members (GF-UP, GF-PHA); tests and quality control

用于承载构件的玻璃纤维增强非饱和聚脂树脂和苯甲酰甲基树脂制层压塑料.(GF-UP.GF-PHA).检验和质量监督

属类：行业标准名称-国际标准-DIN 18820-4-1991

Laminates of textile glass-reinforced unsaturared polyester and phenolic resins for load-bearing structural members (GF-UP, GF-PHA); physical parameters for standard laminates

用于承载构件的玻璃纤维增强非饱和聚酯树脂和苯甲酰甲基树脂制层压塑料.(GF-UP.GF-PHA).标准层压塑料的物理

属类：行业标准名称-国际标准-DIN 18820-2-1991

Laminates of textile glass-reinforced unsaturated polyester and phenacrylic resins for load-bearing structural members (GF-UP, GF-PHA); protective measures for load-bearing laminates

用于承载构件的玻璃纤维增强非饱和聚酯树脂和苯甲酰甲基树脂制层压塑料.(GF-UP.GF-PHA).承载层压塑料的防护措施

属类：行业标准名称-国际标准-DIN 18820-3-1991

Laminates of textile glass-reinforced unsaturated polyester and phenacrylic resins for load-bearing structural members (GF-UP, GF-PHA); structure, manufacture and characteristics

用于承载构件的玻璃纤维增强非饱和聚酯树脂和苯甲酰甲基树脂制层压塑料.(GF-UP.GF-PHA).结构.制造和性能

属类：行业标准名称-国际标准-DIN 18820-1-1991

Standard Test Method for Determining the Compressive Properties of Polymer Matrix Composite Laminates Using a Combined Loading Compression (CLC)Test Fixture

用组合式荷载压力试验夹具测定聚合物基质复合叠材的压力特性的标准试验方法

属类：行业标准名称-国际标准-ASTM D 6641-2001

Contact-Molded Reinforced Thermosetting Plastic (RTP)Laminates for Corrosion Resistant Equipment

在化学药品环境中使用的自承重结构用增强塑料层压材料

属类：行业标准名称-国际标准-ASTM C 582-1995

High-pressure decorative laminates -Composite elements-Part 1: Test methods

装饰用高压层压板 复合成分 第1部分:试验方法

属类：行业标准名称-ISO标准-