Double Lugs with Screwed Shank for Swivels and Turnbuckles

铰节和拉杆用带螺纹轴的托叉

属类：行业标准名称-国际标准-DIN 82008-1971

LUGS WITH COPPER OR ALUMINIUM FLATS AND WITH CONDUCTING COATING FOR ALUMINIUM CONDUCTORS. REQUIREMENTS AND DIMENSIONS.

铝导线用带导电镀层的有铝片或铜片的接头.规则和尺寸

属类：行业标准名称-国际标准-NF C20-131-1974

Cable lugs ; for compression connections, ring type, for aluminium conductors

铝导线用环形压制连接的电缆终端

属类：行业标准名称-国际标准-DIN 46329-1983

SELF-LOCKING ANCHOR NUTS,COUNTERSUNK TYPE,TWO LUGS . SIM THREAD. (RECH.).

埋头内锁紧系留螺母.双耳.米制螺纹

属类：行业标准名称-国际标准-NF L22-533-1975

Self-locking anchor nuts, countersunk type, two lugs with countersunk rivet holes. Sim thread (rech.).

埋头内锁紧系留螺母.双耳多孔.国际单位米制螺纹

属类：行业标准名称-国际标准-NF L22-534-1975

Self-locking anchor nuts, two lugs with countersunk rivet holes. Sim thread (rech.).

内锁紧系留螺母.双耳.多埋孔.国际单位米制螺纹

属类：行业标准名称-国际标准-NF L22-544-1975

Self-locking anchor nuts, two lugs . Sim thread (rech.).

内锁紧系留螺母.双耳.国际单位米制螺纹

属类：行业标准名称-国际标准-NF L22-543-1975

The chipped area is not between the lugs of adjacent positive and negative plates

破碎部分不在相邻的正负极耳之间。

属类：综合句库--

Hose clamps-Part 2: Clamps with fastening lugs

软管夹件.第2部分:带夹紧凸缘的夹件

属类：行业标准名称-国际标准-DIN 3017-2-2002

Hose clamps-Part 5: Wide strip hose clamps with fastening lugs ; Types D and E

软管夹件.第5部分:带夹紧凸缘的宽带软管夹件.D型和E型

属类：行业标准名称-国际标准-DIN 3017-5-2002

Self-locking anchor nuts, floating, two lugs classification 900 MPa/235 degrees C and 425 degrees C. ISO thread.

双耳浮动型内锁紧系留螺母.分类900 MPa /235℃和425℃ .ISO螺纹

属类：行业标准名称-国际标准-NF L22-561-1985

Self-locking anchor nuts, miniature series, two lugs . Classification 900 MPa/235 degrees C and 425 degrees C. ISO thread.

双耳内锁紧系留扁螺母.分类900 MPa / 235℃ 和425℃ .ISO螺纹

属类：行业标准名称-国际标准-NF L22-555-1985

Self-locking anchor nuts, two lugs classification 900 MPa/235 degrees C and 425 degrees C. ISO thread.

双耳内锁紧系留螺母.分类MPa1235℃和425℃.ISO螺纹

属类：行业标准名称-国际标准-NF L22-551-1985

Crimp-type copper or copper alloy non-insulated lugs for copper conductors. Requirements.

铜导线用铜或铜合金镶装式裸套管.规则

属类：行业标准名称-国际标准-NF C20-130-1987

Cable lugs ; for compression connections, cover plate type, for copper conductors

铜导线用压接件鱼尾板形电缆终端

属类：行业标准名称-国际标准-DIN 46235-1983

Lug-style is a wafer body but has tapped lugs matching up to bolt circle of Class 125/150 flanges.

凸耳式:平板式阀体,但是具有螺纹凸耳,用于通过螺栓与125/150磅级法兰连接。

属类：产品说明书-热水器说明-

FIRE FIGHTING EQUIPMENT. POSITIONING OF THE LUGS OR JAWS ON GUILLEMIN-TYPE AND SELF-SEALING SYMMETRICAL COUPLINGS.

消防设备.GUILLEMIN型自动关闭对称接头半壳体或制动片的定位

属类：行业标准名称-国际标准-NF S61-706-1966

Control Experiment on Tractive and Appendiculate Performance of the Tire and Iron Wheel with Lugs Fitted Together

叶轮与胶轮并装对小型拖拉机牵引附着性能的影响

属类：行业术语-中文论文标题-

Standard for Safety for Wire Connectors and Soldering Lugs for Use with Copper Conductors

与铜导线一起使用的接线器和焊片的安全标准

属类：行业标准名称-国际标准-ANSI/UL 486A-1998

SHIPBUILDING. SHAFT LINES. ORDINARY AND CAP PROPELLER NUTS WITH 4 LUGS .

造船工业.轴线.螺旋桨用普通螺母和带四个榫头的罩形螺母

属类：行业标准名称-国际标准-NF J65-111-1958

the power cords are connected by connector lugs (showed in figure 8);

各个电源线由连接接头（图8）连接；

属类：英汉句库-ip.com-

and two fastening pieces are used for fastening tightly the lugs of the two semicircle arciform clamping hoops.

两个紧固件，其用于紧固两个半圆拱状卡箍件的凸耳。

属类：英汉句库-ip.com-

Control Methods for Sagging and Deflection of Large Casing with Four Lugs

四猫爪大型气缸垂弧及挠度的控制方法

属类：中国大陆-www.ilib.cn-

The defining steps of photoresist layer includes exposure and development and the lugs may be joined through stoving to melt.

限定光致抗蚀剂层的步骤还包括曝光、显影。并可利用烘烤步骤使各凸块溶融化，以接合各凸块。

属类：英汉句库-ip.com-

the outer edge of the middle valve body is provided with two circular installing lugs which are distributed in a hexagon way;

中体的外缘设有六个呈正六角形分布的环抱形的安装搭子；

属类：英汉句库-ip.com-

lugs (5) belonging to the clip or snap hook;

属于所述夹持器或安全钩的凸耳（5）；

属类：英汉句库-ip.com-