包含
moulding的中国译典句库查询结果如下:
属类:行业标准名称-试验方法-
属类:机械模具-机械模具-PET吹瓶
属类:机械模具-机械模具-PET吹瓶
属类:机械模具-机械模具-PET吹瓶
属类:文学表达-文学-散文
属类:行业标准名称-国家标准名-GB/T6594.1-1998
属类:行业标准名称-试验方法-
属类:行业标准名称-试验方法-
属类:物品名称-日用品-电器
属类:物品名称-日用品-
属类:物品名称-机械设备-
属类:机械模具-机械模具-PET吹瓶
属类:行业术语-农业-树脂抗SARS-CoV和致病细菌性能的验证
属类:物品名称-机械设备-
属类:物品名称-机械设备-
属类:行业标准名称-ISO标准-
属类:行业标准名称-ISO标准-
属类:行业标准名称-ISO标准-
属类:行业标准名称-ISO标准-
属类:行业标准名称-ISO标准-
属类:行业标准名称-ISO标准-
属类:行业标准名称-试验方法-
属类:综合句库--
属类:社会文化-雕塑-秦俑
属类:社会文化-劳工事务-
属类:行业标准名称-国家标准名-GB/T5472-1985
属类:行业标准名称-国家标准名-GB/T5471-1985
属类:行业标准名称-ISO标准-
属类:行业标准名称-国家标准名-GB/T9352-1988
1 | 含氟聚合物的分散,模塑和挤压材料-第1部分:命名系统和基本规范 | fluoropolymer dispersions and moulding and extrusion materials-part1 : designation system and basis for specifications | |
2 | 挤吹的瓶子瓶颈不算平整,通常都需要刮去毛边才能保证旋上瓶盖后不漏水。 | In extrusion blow moulding , the bottle neck is not smooth, and has to be scraped to remove the flashing. This avoids leakage after a cap is put on. | |
3 | 挤吹瓶子的手柄是中空的。 | Hollow bottle handles could be made in the extrusion blow moulding process. | |
4 | 挤吹亦产生较多的边角料,要二次加工去除并循环再用。 | A lot of waste plastic is produced in extrusion blow moulding which has to be removed and recycled. | |
5 | 教书和塑造孩子们的心性是我对社会的一点点贡献,以回报我通过教育获得的一切丰富经历。 | Teaching and moulding young minds is my small contribution to society, in return for all the enriching experience I received through my own education. | |
6 | 聚苯乙烯(PS)模塑和挤出材料第1部分:命名系统和分类基础 | Polystyrene (PS)moulding and extrusion materials Part 1: Designation system and basis for specifications | |
7 | 聚苯乙烯(ps)模塑和挤出材料第2部分:试样制备和力学性能试验 | plastics-thermoplastic polyester(tp)moulding and extrusion materials-part 2:preparation of test specimens and determination of properties | |
8 | 聚丁烯(pb)模制品和挤塑用料-第2部分:试样的制备和特性的测定 | polybutylene(pb)moulding and extrusion materials-part2 : preparation of test specimens and determination of properties | |
9 | 绝缘配件,电机、电器或电气设备用,除仅为进行装配而在模压时装入任何次要金属元件(如螺纹插座)外,这些配件全部由陶瓷材料制成 | insulating fitting for electrical machines appliances or equipment being fittings wholly ceramic materials apart form any minor components of metal (e.g.,threaded sockets)incorporated during moulding solely for purposes of assembly | |
10 | 蜡模型,供电镀用的 | moulding shape of wax for electrolating | |
11 | 离心铸模机圆柱型模(石墨或其他碳化物及陶瓷的型模除外) | cylindrical mould (excl. of graphite or other carbon and of ceramics),for centrifugal moulding machines | |
12 | 每一个腔都有独立的加热及探温,瓶坯底不留水口,不注射时针阀封闭浇道,故浇道不会堵塞。 | Each cavity has its own heating zone and is temperature measured by a thermocouple. There is no sprue at the bottom of the preform. When the injection moulding stops, the valve gate closes the runner so the runners will not be blocked. | |
13 | 米兰大学研究的试验结果表明,“一般而言,Polygiene树脂的抗微生物效力总是高于标准的尿素-甲醛模塑料。 | According to the test results from the University of Milan study, “In general, the antimicrobial effect of Polygiene resins was always better than the standard urea-formaldehyde moulding compound. | |
14 | 面团或糖果造型机,工业用 | industrial moulding machine for dough or confectionery | |
15 | 模塑机(手提式除外),用于木料,软木,骨,硬质橡胶,硬质塑料或其它类似硬质材料 | moulding machine (excl. hand-held)for wood,cork,bone,hard rubber,hard plastics or similar hard materials | |
16 | 模铸工具 压铸模和注塑模及压铸冲模部件 术语和符号 两种语言版 | Tools for moulding-Components of compression and injection moulds and diecasting dies-Terms and symbols | |
17 | 模铸工具 有肩推杆 | Tools for moulding-Shouldered ejector pins | |
18 | 模铸工具 圆柱头推杆 | Tools for moulding-Ejector pins with cylindrical head | |
19 | 模铸工具 圆柱头推管 一般用途基本系列 | Tools for moulding-Ejector sleeves with cylindrical head-Basic series for general purposes | |
20 | 模铸工具 注塑模用隔热板 | Tools for moulding-Thermal insulating sheets for injection moulds | |
21 | 模铸工具.浇口套.尺寸 | Tools for moulding-Sprue bushes-Dimensions | |
22 | 耐冲击聚苯乙烯模和挤塑材料第2部分:试样的制备和性能的测定 | impact-resistant polystyrene(ps-i)moulding and extrusion materials-part 2:preparation of test specimens and determination of properties | |
23 | 你可以把塑料放进模子里施加一定压力把它做成碗或是桶。 | You can shape the plastic into bowls or buckets by moulding it under pressure. | |
24 | 秦始皇陵兵马俑塑造的特点是模制与捏塑相结合 | The making of the warrior figures combined hand sculpting and moulding techniques. | |
25 | 全自动注塑机;全自动压注模塑机;塑料注塑机 | fully automatic plastic injection moulding machine | |
26 | 热固性模塑料矩道流动固化性试验方法 | Test method for rectangular flow cure properties of thermosetting moulding compounds | |
27 | 热固性模塑料压塑试样制备方法 | Preparation method for compression moulding of specimens of thermosetting moulding materials | |
28 | 热塑性塑料 为测定注塑用材料的静液压强度的管状试样的准备 | Thermoplastic materials-Preparation of tubular test pieces for the determination of the hydrostatic strength of materials used for injection moulding | |
29 | 热塑性塑料压缩试样的制备 | Plastics--Compression moulding test specimens of thermoplastic materials |