Stock: (1)The beaten and refined pulp ready for papermaking. It is the combination of fibre, size, fillers , and alum which determines the characteristics of the paper and its use. (2)Any material to be printed on.

(1)浆料,(2)承印物料:(1)经过打浆和精磨,即可用来造纸的浆。它是由纤维,胶,填料和明矾混和而成。这些物料,决定纸的用途和特性。(2)施印用的任何物料。

属类：行业术语-印刷-

Study on Preparation and Wettability of Rapidly-cooled Ribbon Fillers of Al-Si-Cu-Zn

Al-Si-Cu-Zn急冷钎料制备及润湿性

属类：行业术语-中文论文标题-

Exxelor modifiers also act as coupling agents to promote chemical bonding between fillers , reinforcements and the polymer matrix.

Exxelor改性剂还可作为偶联剂,增强填料、增强材料和聚合物主体之间的化学粘合。

属类：单位简介-化工公司网站-美孚

Effects of Different Kinds and Usage Amounts of Whisker Fillers on the Mechanical Properties of Resin Composite

不同晶须及晶须用量对复合树脂力学性能的影响

属类：行业术语-中文论文标题-

Performance of Polyurethane Elastomer with Different Inorganic Fillers

不同无机填料在聚氨酯弹性体中的性能对比

属类：行业术语-中文论文标题-

On the Features of Fluid Inclusion in Paleo-Karst Fillers of the Lower Paleozoic Group at Chengdao Oilfield

埕岛下古生界古岩溶充填物流体包裹体特征分析

属类：行业术语-中文论文标题-

MANUAL METAL ARC WELDING ELECTRODES DEPOSITING A METAL FOR USE AT LOW TEMPERATURES. SYMBOLISATION. FILLERS MATERIALS.

低温使用的有金属析出的手工电弧焊用药皮金属焊条.符号.焊条

属类：行业标准名称-国际标准-NF A81-347-1979

Fire barriers; fillers for fire-doors; mineral fibre boards (felts); definition, designation, requirements, tests

防火闸门.防火门填料.矿物纤维板.概念、标志、要求、检验

属类：行业标准名称-国际标准-DIN 18089-1-1984

Composition cork-Expansion joint fillers -Specifications, packaging and marking

复合软木 膨胀连接填充料 规范、包装和贴标志

属类：行业标准名称-ISO标准-

Composition cork-Expansion joint fillers -Test methods

复合软木 膨胀连接填充料 试验方法

属类：行业标准名称-ISO标准-

Composition cork-Expansion joint fillers -Specifications, packaging and marking.

复合软木.膨胀连接填充料.规范、包装和标记

属类：行业标准名称-国际标准-NF B57-048-2003

AEROSPACE SERIES. LUBRICATING DRY FLUOROCARBONATED COATING WITH BINDING MATERIAL AND FILLERS , OF A MINIMUM THICKNESS OF 5 MICROMETERS ON METALLIC SUBSTRATE. QUALITY OF COATED PARTS.

航空航天工业.金属底层最小厚度5微米的带粘接材料和滤膜的润滑碳氟化合物镀膜.镀膜部分的质量

属类：行业标准名称-国际标准-NF L10-201-1998

Aerospace series-T-ring fillers in titanium alloy for welding pipes-14 000 kPa nominal pressure.

航空航天系列.焊接管用钛合金三通垫环

属类：行业标准名称-国际标准-NF L46-342-2002

Aerospace series-T-ring fillers in titanium alloy for welding pipes-28 000 kPa nominal pressure.

航空航天系列.焊接管用钛合金三通垫环.28 000 kPa大气压

属类：行业标准名称-国际标准-NF L46-343-2002

Aerospace series-T-ring fillers in titanium alloy for welded pipes-14000 kPa nominal pressure

航空航天系列.焊接管用钛合金制成的T环形填充物.14000kPa标称压力

属类：行业标准名称-国际标准-BS EN 3688-2001

Aerospace series-T-ring fillers in titanium alloy for welding pipes-28000 kPa nominal pressure

航空航天系列.焊接管用钛合金制成的T环形填充物.28000kPa标称压力

属类：行业标准名称-国际标准-BS EN 3689-2001

Composition cork-Expansion joint fillers -Specifications, packaging and marking

合成材料的瓶塞.膨胀连接填料.规范、包装和标记

属类：行业标准名称-国际标准-BS ISO 3869-2001

Composition cork-Expansion joint fillers -Test methods

合成材料的瓶塞.膨胀连接填料.试验方法

属类：行业标准名称-国际标准-BS ISO 3867-2001

Few plastics contain only the polymer resin; many also contain plasticizers (to change the melting point and make them softer), colorants, reinforcements, and fillers (to improve mechanical properties such as stiffness), and stabilizers and antioxidants (to protect against aging, light, or biological agents).

很少塑料只含树脂,许多也含有可塑剂(以改变熔点,使其变软)、着色剂、加固剂、填塞物(提高机械属性如硬度)、稳定物和抗氧化剂(以保护免遭老化、光照或生物制剂作用)。

属类：化学及生命科学-化学-

Products and systems for the protection and repair of concrete structures. Granulometry analysis. Part 2 : test method for fillers for polymer bonding agents.

混凝土结构的保护和修复产品和系统.粒度分析.第2部分:聚合物粘结剂填充试验方法

属类：行业标准名称-国际标准-NF P18-921-2-1999

Products and systems for the protection and repair of concrete structures-Granulometry analysis-Test method for fillers for polymer bonding agents

混凝土结构的防护和维修用产品和系统.粒度分析.聚合物粘合剂用填料的检验方法

属类：行业标准名称-国际标准-BS EN 12192-2-1999

Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types

混凝土结构用预制膨胀接缝填料的试验方法(非挤压和弹性型)

属类：行业标准名称-国际标准-ASTM D 545-1999

Products and systems for the protection and repair of concrete structures-Granulometry analysis-Part 2: Test method for fillers for polymer bonding agents;

混凝土支承结构的防护和维修用产品和系统.粒度分析.第2部分;聚合物粘合剂用填料的检验方法

属类：行业标准名称-国际标准-DIN EN 12192-2-1999

Properties of Heat Conductive Silicone Rubber Filled with Hybrid Fillers

混杂填料填充导热硅橡胶性能研究

属类：行业术语-中文论文标题-

Testing of polymer concretes (reaction resin concretes)for mechanical engineering purposes; testing of binders, fillers and reaction resin compounds

机器制造业用反应性树脂混凝土的检验.粘结剂.填充剂和可加工的混合剂的检验

属类：行业标准名称-国际标准-DIN 51290-2-1991

Tests for geometrical properties of aggregates-Part 10 : assessment of fines-Grading of fillers (air jet sieving).

集料的几何性能试验.第10部分:细粒评定.填料的分级(喷气筛)

属类：行业标准名称-国际标准-NF P18-622-10-2002

Tests for geometrical properties of aggregates-Assessment of fines-Grading of fillers (air-jet sieving)

集料的几何性能试验.颗粒的评价.填充物的级别.(喷气筛)

属类：行业标准名称-国际标准-BS EN 933-10-2001

Test for geometrical properties of aggregates-Part 10: Assessment of fines; Grading of fillers (air jet sieving);

集料几何性能的检验.第10部分:完好性评价.填充物分级

属类：行业标准名称-国际标准-DIN EN 933-10-2001

Lifecycle Assessment of Several Fillers in Asphalt Mixtures

几种不同填料用在沥青混合料中的生命周期评价

属类：行业术语-中文论文标题-

Effect of High Shearing Stress during Melt Extruding on the Mechanical Properties of PP-HDPE-Talc Fillers Blends

挤出共混中的高剪切应力对PP-HDPE-滑石粉共混材料力学性能的影响

属类：行业术语-中文论文标题-