The advantage of hardness test is fast, inexpensive and relatively nondestructive, leaving only a small indentation in the material.

硬度测试的优点是快，便宜，并且比较不具破坏性，只在材料上留下小小的压痕。

属类：行业术语-检验检疫-

Hardness can be defined as resistance to indentation or scratching, and is usually stated relative to other materials. Scales of hardness usually give high numbers to hard materials, and low numbers to soft materials. Hardness is reduced by heating.

硬度可以被定义为抵受压痕或划痕的能力，通常是相对于其他材料而言。对于硬的材料，硬度范围通常给予高的数值，而对软材料给予低的数值。当加热时硬度下降。

属类：行业术语-检验检疫-

Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor (08.02

用Barcol印压计测定刚性塑料的压痕硬度的试验方法

属类：行业标准名称-国际标准-ANSI/ASTM D 2583-1992(08.02)

Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor

用巴氏压痕仪测定铝合金压痕硬度的试验方法

属类：行业标准名称-国际标准-ASTM B 648-1978

Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage

用维氏硬度仪测定铝合金压痕硬度的试验方法

属类：行业标准名称-国际标准-ASTM B 647-1984

Linoleum is flexible, warm, and unaffected by ordinary floor temperatures, and it does not readily burn. It is specially hardened to resist indentation and is not susceptible to damage from fats, oils, greases, or organic solvents.

油地毡柔韧、保暖、不受普通地面温度的影响、也不容易起火。经特殊硬化处理后不容易产生凹痕，也不会受脂肪、油类或有机溶剂的腐蚀破坏。

属类：行业术语-艺术-工艺

Surfaces for sports areas-Determination of resistance to indentation ;

运动场表面.耐压痕性能的测定

属类：行业标准名称-国际标准-DIN EN 1516-2000

SURFACES FOR SPORTS AREAS. DETERMINATION OF RESISTANCE TO INDENTATION . (EUROPEAN STANDARD EN 1516).

运动场所表面.耐凹痕的测定

属类：行业标准名称-国际标准-NF P90-114-1999

Methods of test for masonry units-Part 2: Determination of percentage of voids in aggregate concrete masonry units (by paper indentation );

砖石的检验方法.第2部分:混凝土砖石中空隙百分比的测定(用纸张压痕法)

属类：行业标准名称-国际标准-DIN EN 772-2-1998

Methods of test for masonry units-Determination of percentage area of voids in aggregate concrete masonry units (by paper indentation )

砖石结构的试验方法.集料混凝土砖石结构孔隙面积百分率的测定

属类：行业标准名称-国际标准-BS EN 772-2-1998