(in the metric system)one hundredth part of

(十进制中的)百分之一

属类：综合句库-典型例句-

The first commercial arc furnace in the U.S. (1906)had a capacity of four tons (3.6 metric tons)and was equipped with two electrodes.

1906年在美国装设了第一个工业用电弧炉;其装料量为4吨(3.6公吨)，并装备了两个电极。

属类：工程技术-机械与工具-

Britain changed to a metric system of currency in 1970.

1970年英国已改用公制货币.

属类：综合句库-典型例句-

Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches; Manufacturing tolerances on the threaded portion

ISO米制螺纹公差为4H～8H和4G～6G的粗牙与细牙的磨牙丝锥 螺纹部分的制造公差

属类：行业标准名称-ISO标准-

Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches; manufacturing tolerances on the threaded portion; technical corrigendum 1

ISO米制螺纹公差为4H～8H和4G～6G的粗牙与细牙的磨牙丝锥 螺纹部分的制造公差 技术勘误1

属类：行业标准名称-ISO标准-

Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches; manufacturing tolerances on the threaded portion; amendment 2

ISO米制螺纹公差为4H～8H和4G～6G的粗牙与细牙的磨牙丝锥 螺纹部分的制造公差 修改2

属类：行业标准名称-ISO标准-

ISO metric trapezoidal screw threads; tolerances

ISO米制梯形螺纹 公差

属类：行业标准名称-ISO标准-

ISO metric trapezoidal screw threads; Basic dimensions

ISO米制梯形螺纹 基本尺寸

属类：行业标准名称-ISO标准-

ISO metric trapezoidal screw threads; Basic profile and maximum material profiles

ISO米制梯形螺纹 基本牙型的最大实体牙型

属类：行业标准名称-ISO标准-

ISO metric trapezoidal screw threads; General plan

ISO米制梯形螺纹 通用方案

属类：行业标准名称-ISO标准-

ISO general purpose screw threads-Basic profile-Part 1: Metric screw threads

ISO一般用途螺纹 基本牙型 第1部分:米制螺纹

属类：行业标准名称-ISO标准-

ISO general purpose metric screw threads-Tolerances-Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing

ISO一般用途米制螺纹 公差 第5部分:与镀锌前公差带位置为h最大尺寸的热沉镀锌外螺纹相配的内螺纹的极限尺寸

属类：行业标准名称-ISO标准-

ISO general-purpose metric screw threads; basic dimensions

ISO一般用途米制螺纹 基本尺寸

属类：行业标准名称-ISO标准-

ISO general-purpose metric screw threads-Gauges and gauging

ISO一般用途米制螺纹 量规和量规检验

属类：行业标准名称-ISO标准-

ISO general purpose metric screw threads-Selected sizes for screws, bolts and nuts

ISO一般用途米制螺纹 螺钉、螺栓和螺母的选用尺寸

属类：行业标准名称-ISO标准-

ISO general purpose metric screw threads-General plan

ISO一般用途米制螺纹 直径与螺距系列

属类：行业标准名称-ISO标准-

The way it was done in 1970 required the harvesting, processing and combustion of three billion metric tons of coal and lignite,17 billion barrels of oil, more than a trillion cubic meters of natural gas and perhaps two billion cubic meters of fuelwood.

按照70年的能源供应，需要开采、加工和燃烧30亿公吨的煤和褐煤，170亿桶的石油，一万多亿立方米的天然气和大约20亿立方米的木柴。

属类：社会文化-新闻报道-

The Contract Equipment is approximately __ metric tons in gross weight and __ metric meters in total volume.

本合同设备的总毛重大约为___公吨,总体积大约为___立方米。

属类：产品说明书-合同-

No. We normally refer to metric ton.

不，我们通常指公吨。

属类：口语表达-未分类-

Long ton: Imperial ton (2240 lbs.), equal to 1.12 short (US)tons (2000 lb.), or 1.01161 metric tonne.

长吨:英制重量(1长吨为2240磅)，等于1.12短吨(美制，1短吨为2000磅)或1.0161公吨。

属类：行业术语-印刷-

The Technical Documentation shall be drafted in metric system and be stated and explained in English, unless otherwise provided.

除非另有规定,技术文件应采用公制,说明和解释采用英文。

属类：商务文书-合同-

Normal diameters for ventilation pipe line and accessories for ships metric series

船用通风系统管路和附件的公称通径

属类：行业标准名称-国家标准名-GB/T1560-1979

Most industry has used the metric system for years.

大多数工业多年来一直用公制。

属类：综合句库--

The change to the metric system of measurement should increase the general use of the tex system in all segments of the industry. ASTM has identified the rex yarn number as the recommended standard.

度量系统向米制的过渡,要求纺织工业各个领域普遍使用特克斯系统。美国材料实验协会已经确认,特克斯已作为推荐使用的纱线细度标准。

属类：行业术语-纺织服装-

Short ton: American ton (2000 lbs.)equal to 0.893 long (imperial)tons, or 0.9072 metric tonnes.

短吨:美国制的吨(2000磅)，相等于0.893长吨(英制)或等于0.9072公吨。

属类：行业术语-印刷-

Most characters of economic value to plant and animal breeders are metric characters

对植物和动物育种家具有经济价值的大多数性状是一些度量性状。

属类：综合句库--

Two-and three-dimensional Euclidean spaces are metric spaces, as are inner product spaces, vector spaces, and certain topological spaces.

二维和三维的欧几里德空间是度量空间。另外，内乘空间、向量空间以及某些拓扑空间等也都是度量空间

属类：自然科学-数学-

Should the Contract Equipment weight 2 or more than 2 metric tons

凡重量为2吨或超过2吨的合同设备

属类：商务文书-合同-

Methods for chemical analysis of fluorspar--The iodo-metric method for the determination of sulphide content

氟石化学分析方法碘量法测定硫化物量

属类：行业标准名称-国家标准名-GB/T5195.4-1985

They can be obtained in all the industrial sizes and their metric equivalents.

各种工业尺寸或公制尺寸的胸架都有。

属类：行业术语-纺织服装-