我们矢志于为追求精致英译的翻译员助上一臂之力。集千万句库为你所用，借万千智慧任尔调配，通译句典——为攀登翻译高峰另辟蹊径！
包含
injection的中国译典句库查询结果如下：
Beam type gas injection packing support plate
梁型气体喷射式填料支承板、梁型气体喷射式填料支承板施工图
属类：行业标准名称-技术规范-工程建设
Clinical trials showed the drug to be as effective as the standard clot buster t-PA and easier to use, since it can be administered in one quick injection instead of an-hour-and-a-half infusion
临床实践显示,此药与标准血栓通t-PA一样有效,但使用起来更为方便,因为它叫以用一次性快速注射代替一个半小时的输注。
属类：综合句库--
An intravenous injection of a narcotic.
麻醉注射静脉内的麻醉剂注射
属类：综合句库--
Come to have an injection every other day.
每隔一天来打一针。
属类：综合句库--
The morphine was administered by injection
那吗啡是注射进去的
属类：综合句库--
You need an injection .
你需要打一针。
属类：综合句库--
Nothing is wrong with the injection pump.
喷射泵没毛病。
属类：综合句库--
A hypodermic injection ;a shot.
皮下注射;注射
属类：综合句库--
A hypodermic injection [needle, syringe]
皮下注射[注射针,注射器]
属类：综合句库--
A hypodermic injection ,syringe,or needle.
皮下注射器一次皮下注射,皮下注射器,或皮下注射的针
属类：综合句库--
Motor vehicles cradle-mounted in-line fuel injection pumps for diesel engimes--Mounting dimensions
汽车柴油机架装直列式喷油泵安装尺寸
属类：行业标准名称-国家标准名-GB/T16570-1996
A slight prick, and the injection was over.
轻轻的一扎,针就打好了。
属类：综合句库--
Please give me an injection of pain killer.
请给我打一针止痛针。
属类：综合句库--
fully automatic plastic injection moulding machine
全自动注塑机;全自动压注模塑机;塑料注塑机
属类：社会文化-劳工事务-
Injection moulding of test specimens of thermoplastic materials--Part 1: General principles and moulding of multipurpose and bar test specimens
热塑性塑料材料注塑试样的制备第1部分:一般原理及多用途试样和长条试样的制备
属类：行业标准名称-国家标准名-GB/T17037.1-1997
In case of a condensing gas drive, the original reservoir fluid and the injection gas are not miscible, but miscibility may be achieved at a later time, at the injection well
如果进行凝析气驱,注入井中的原始液体与注入气在起初是不可能混相的,但过一定时间混相则可能发生。
属类：综合句库--
If the injection period is extended long enough, the effects of isolated eddy cavities are neutralized
如果喷注时期延续得足够长,隔开的涡流区的影响被抵消。
属类：综合句库--
X-ray photography of the pelvis of the kidney and associated structures after injection with a radiopaque dye.
肾盂照相术有关肾盂以及相连组织,在注射了一种辐射不透明的染料后而进行X射线拍照的技术
属类：综合句库--
Injection mould for plastic large-size mould bases-Standard mould bases
塑料注射模大型模架标准模架
属类：行业标准名称-国家标准名-GB/T12555.1-1990
Injection mould for plastic large-size mould bases-Guide pillars with shoulder
塑料注射模大型模架有肩导柱
属类：行业标准名称-国家标准名-GB/T12555.9-1990
| 1 | 梁型气体喷射式填料支承板、梁型气体喷射式填料支承板施工图 | Beam type gas injection packing support plate |
|
| 2 | 临床实践显示,此药与标准血栓通t-PA一样有效,但使用起来更为方便,因为它叫以用一次性快速注射代替一个半小时的输注。 | Clinical trials showed the drug to be as effective as the standard clot buster t-PA and easier to use, since it can be administered in one quick injection instead of an-hour-and-a-half infusion |
|
| 3 | 麻醉注射静脉内的麻醉剂注射 | An intravenous injection of a narcotic. |
|
| 4 | 每隔一天来打一针。 | Come to have an injection every other day. |
|
| 5 | 那吗啡是注射进去的 | The morphine was administered by injection |
|
| 6 | 你需要打一针。 | You need an injection . |
|
| 7 | 喷射泵没毛病。 | Nothing is wrong with the injection pump. |
|
| 8 | 皮下注射;注射 | A hypodermic injection ;a shot. |
|
| 9 | 皮下注射[注射针,注射器] | A hypodermic injection [needle, syringe] |
|
| 10 | 皮下注射器一次皮下注射,皮下注射器,或皮下注射的针 | A hypodermic injection ,syringe,or needle. |
|
| 11 | 汽车柴油机架装直列式喷油泵安装尺寸 | Motor vehicles cradle-mounted in-line fuel injection pumps for diesel engimes--Mounting dimensions |
|
| 12 | 轻轻的一扎,针就打好了。 | A slight prick, and the injection was over. |
|
| 13 | 请给我打一针止痛针。 | Please give me an injection of pain killer. |
|
| 14 | 全自动注塑机;全自动压注模塑机;塑料注塑机 | fully automatic plastic injection moulding machine |
|
| 15 | 热塑性塑料材料注塑试样的制备第1部分:一般原理及多用途试样和长条试样的制备 | Injection moulding of test specimens of thermoplastic materials--Part 1: General principles and moulding of multipurpose and bar test specimens |
|
| 16 | 如果进行凝析气驱,注入井中的原始液体与注入气在起初是不可能混相的,但过一定时间混相则可能发生。 | In case of a condensing gas drive, the original reservoir fluid and the injection gas are not miscible, but miscibility may be achieved at a later time, at the injection well |
|
| 17 | 如果喷注时期延续得足够长,隔开的涡流区的影响被抵消。 | If the injection period is extended long enough, the effects of isolated eddy cavities are neutralized |
|
| 18 | 肾盂照相术有关肾盂以及相连组织,在注射了一种辐射不透明的染料后而进行X射线拍照的技术 | X-ray photography of the pelvis of the kidney and associated structures after injection with a radiopaque dye. |
|
| 19 | 塑料注射模大型模架标准模架 | Injection mould for plastic large-size mould bases-Standard mould bases |
|
| 20 | 塑料注射模大型模架有肩导柱 | Injection mould for plastic large-size mould bases-Guide pillars with shoulder |
|
查询记录
