Injection mould for plastic large-size mould bases-Support plates

塑料注射模大型模架支承板

属类：行业标准名称-国家标准名-GB/T12555.5-1990

Injection mould for plastic large-size mould bases-Straight guide bushes

塑料注射模大型模架直导套

属类：行业标准名称-国家标准名-GB/T12555.11-1990

Injection mould for plastic large-size mould bases-Elamping plates

塑料注射模大型模架座板

属类：行业标准名称-国家标准名-GB/T12555.3-1990

With the increasing content of intermediate molecular weight components in the gas phase, miscibility may be achieved even though this was not possible with the original injection gas

随着中等分子量组分在气相中的增加，混相就会发生，尽管这对原始注入气来说是不可能的。

属类：综合句库--

They varied both chamber pressure and mixture ratio, making use of a stepfunction change in the oxidizer injection rate

他们通过用氧化剂喷射速率阶跃函数变化的方法来改变气室压力和混合比。

属类：综合句库--

He is given a tab injection .

他注射了伤寒一副伤寒甲一副伤寒乙三联疫苗。

属类：综合句库--

In particular only a successive programme of injection of the vertical joints renders the work monolith in respect of the succeeding masses and stages

特别是，对后期坝体与以后施工阶段而言只有垂直接缝的分期灌桨程序，才能给与工程以整体性。

属类：综合句库--

A smallpox injection ,epidemic

天花的预防注射、流行

属类：综合句库--

The firm would be brought back to life by an injection of new funds.

投入新资金会使这家公司恢复生气。

属类：综合句库--

Vortex injection provides a form of swirl or cyclone combustion for a rocket engine similar to systems often employed in industrial furnaces

涡流喷射在火箭发动机中产生一种涡流或旋涡形式的燃烧，与工业炉中常采用的系统相似。

属类：综合句库--

Our wide variety of in-house injection machines allow a wide variety of customized plastic products for our customers..

我们拥有各种型号注塑机,可以为客户定制加工各种塑料制品。

属类：应用文体--

I’ll give you an injection first.

我先来给你打一针。

属类：综合句库--

I’m sure an antifebrile injection will bring your fever down in no time

我相信注射一针退热剂会使你的热度立刻降下来。

属类：综合句库--

I had a bad reaction after my typhoid injection .

我注射伤寒针剂后产生了不良反应。

属类：综合句库--

mould other than injection -or compression-type moulds (excl. of graphite or other carbon and of ceramics or glass),for rubber or plastics

橡胶或塑料模(石墨或其他碳及陶瓷或玻璃的除外)注入型或压缩式模除外)

属类：物品名称-机械设备-

injection -or compression type mould (excl. of graphite or other carbon and or ceramics or glass),for rubber or plastics

橡胶或塑料用注入型或压缩式模(石墨或其他碳及陶瓷或玻璃的除外)

属类：物品名称-机械设备-

mould injection -or compression-type (excl. of graphite or other carbon and of ceramics or glass),for rubber or plastics

橡胶或塑料用注入型或压缩式模(石墨或其他碳及陶瓷或玻璃的除外)

属类：物品名称-机械设备-

Examination of the blood vessels using x-rays following the injection of a radiopaque substance.

血管造影术注射射线不能穿透物体后用X射线对血管进行的检查

属类：综合句库--

My jaw still tickles from the dentists injection

牙医的麻醉注射使我的下腭仍然有酥痒的感觉。

属类：综合句库--

The rate of absorption following subcutaneous injection of a drug is often sufficiently constant and slow to provide a sustained effect

药物经皮下注射后吸收率均匀而缓慢，药效持久。

属类：综合句库--

After some time, miscibility may be achieved between the ol and the injection gas

一段时间后，在油和气之间出现混相。

属类：综合句库--

After some time, miscibility may be obtained between the liquid phase and the injection gas

一段时间以后，液相与注入气就会发生混相。

属类：综合句库--

A cash injection of $10 million will be used to improve one of America’s dirtiest resident places.

一千万美元的现金投入将用来改善美国一个最污秽的住宅区。

属类：综合句库--

The wastewater samples is transmitted by an air-operated aspirator to the liquid injection valve

用气动吸引器将废水试样送入液体注射阀。

属类：综合句库--

Since injection density cannot be varied independently, it is difficult to show conclusively its effect on combustion stability

由于不可能独立地改变喷射密度，要确定地指出喷射密度对燃烧稳定性的影响是很困难的。

属类：综合句库--

When he was critically ill, a nurse gave him an injection .

在濒危时刻，护士给他打了一针。

属类：综合句库--

In furnace sorbent injection the limestone or dolomite is injected with or without coal in the high temperature zone of the combustor where calcination and sulfation takes place and as a result removal of SO2 is achieved

在炉内吸附剂注入法中，石灰石或白云石在燃烧炉的高温区同煤一起注入(或分别注入)，煅烧作用和硫酸盐化作用都发生在这个高温区，同时可消除二氧化硫。

属类：综合句库--

In the U.S., the injection has retained its equitable character

在美国，强制令保持了公道的特性。

属类：综合句库--

Injection mould for plastic-Specifications for medium size and small size mould bases

塑料注射模中小型模架技术条件

属类：行业标准名称-国家标准名-GB/T12556.2-1990